User manual BLAUPUNKT MALIBU C50 US

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone hotline . . . . . . . . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Important information . . . . . . . . . . . . . . [. . . ] Note: When attaching the control panel, make sure you do not press the display. Removing the control panel Press the button 1. The control panel locking mechanism opens. If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i. e. radio, cassette or CD changer mode) when the panel is replaced. 1 First, pull the control panel straight off the unit and then out towards the left. 7 PORTUGUÊS ESPAÑOL FRANÇAIS The unit switches off after the control panel is removed. Any cassette already inserted in the unit remains there. SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off. Switching on/off using the vehicle ignition. If the unit is correctly connected to the vehicle's ignition, it will switch on/off simultaneously with the ignition. You can also switch the unit on even if the ignition is off. To do so, press button 3 until the unit turns on. Note: To protect the vehicle battery, the unit will switch off automatically after one hour. VOLUME ADJUSTMENT Volume adjustment The system volume can be adjusted in steps from 0 (off) to 66 (maximum). To increase the system volume, turn the volume control to the right. To decrease the system volume, turn the volume control to the left. Setting the power-on volume You can set the unit's default power-on volume. Press the MENU button 8. Press the button :. Switching on/off using the removable control panel. Remove the control panel. The unit switches off. "ON VOLUME" appears in the display. Press the MENU button 8. Keep pressing the Press the button : until "SENS" appears in the display. button :. Briefly press the TS button ?. The automatic station storing procedure begins. "T-STORE" appears in the display. After the process is completed, the station that is stored in location 1 of the respective memory level will be played. The display shows the currently set value for sensitivity. "SENS HI" means that the tuner is highly sensitive. "SENS LO" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. Set the required sensitivity using the and buttons :. Listening to preset stations Select the memory or frequency range. When you have finished making your changes, press the MENU button 8 or OK ;. Press the preset station button 1-6 > of the station you want to listen to. Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play all receivable stations. You can set the scanning time in the menu. Select the required memory (FM1, FM2 or FMT) or the AM frequency range. 10 RADIO MODE Press the OK button ; for longer than two seconds. "SCAN" appears briefly in the display followed by the current frequency (which flashes). Stopping SCAN and continuing listening to the station Press the MENU button 8. [. . . ] Set the minutes using the and buttons :. button : until "CLK DISP OFF" or "CLK DISP ON" appears in the display. Press the or button : to switch between ON and OFF. your changes, press the MENU button 8 or OK ;. When you have finished making Once you have set the minutes, press the button :. The hours now flash on and off. 16 AUDIO SETTINGS AND VOLUME DISTRIBUTION If loudness is activated, the bass and treble levels are aurally compensated, i. e. they are increased at lower volume levels. ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Audio and volume distribution settings Bass settings To set the bass, press the AUD button =. [. . . ]