User manual BLAUPUNKT MELBOURNE 120

[. . . ] Com Operating and installation instructions Controls 1 2 3 4 5 6 7 8 9 17 16 15 14 13 12 11 10 1 button (Helsinki 220 BT and London 120) Unlock the detachable control panel Short press: Call up/close menu Long press: Start scan function 9 Microphone (Helsinki 220 BT and Sydney 220 BT) : USB socket ; Front AUX-IN socket < 2 MENU button 3 On/Off button Short press: Switch on car sound system In operation: Mute car sound system (Mute) Long press: Switch off car sound system 4 Volume control button (Helsinki 220 BT and Sydney 220 BT) Short press: Answering a call, speed dial Long press: Activate voice dialing button (Helsinki 220 BT and Sydney 220 BT) Ending/rejecting a phone call (Helsinki 220 BT and Sydney 220 BT) Keys 1 - 7 (London 120 and Melbourne 120) = In the menu: Change settings Fast-Browse mode: Select folder and track (Helsinki 220 BT and Sydney 220 BT) 5 CD tray > Keys 1 - 5 (Helsinki 220 BT and London 120) 6 Display 7 ?Infrared receiver @ SRC button / button In the menu: Select menu item Radio mode: Start seek tuning MP3/WMA mode: Change to next/previous folder / button In the menu: Change menu level Radio mode: Adjust the stations Other operating modes: Track selection Select memory bank or audio source A DIS button Switch display B SD card slot (Sydney 220 BT and Melbourne 120) 8 button (Eject) (Helsinki 220 BT and London 120) Eject a CD 18 2 Contents Safety notes . 25 3 Safety notes Safety notes The car sound system was manufactured according to the state of the art and established safety guidelines. Even so, dangers may occur if you do not observe the safety notes in these instructions. [. . . ] If required, enter the PIN of the streaming device: u Turn the volume control 4 to select a digit for the respective position. U Press the or button 7 to reach the next or previous position. U Press the button 7 repeatedly until you reach past the last position to confirm the PIN entered. Note: Not all streaming devices require the entry of a PIN on the car sound system. For some streaming devices, you have to enter the PIN of the car sound system instead. For these devices, press only the button 7 repeatedly until you reach beyond the last position, thereby confirming the current PIN, and then enter this PIN on the streaming device. The display shows "PAIRING" and the Bluetooth® symbol is flashing. The car sound system can now be recognised by the streaming device for approx. U Search the car sound system from your streaming device (Bluetooth® name: "BLAUPUNKT") and establish the connection. Enter the PIN of the car sound system, if necessary. The display may show "PAIRED", followed by "CONNECTED", as soon as the car sound system and the streaming device are paired and connected. notes: · If no connection can be established, the display briefly shows "CONNECT FAILED". ⷠAfter switch-on, the car sound system automatically attempts to reconnect the device connected last. If the connection attempt fails, the display briefly shows "DISCONNECTED". If necessary, attempt to re-establish the connection from the streaming device. ⷠIf the device connected last cannot be located after switching on the car sound system, the car sound system attempts to connect one of the other paired devices. If none of the devices is located, the display briefly shows "NO DEVICE". 15 Bluetooth® Telephone functions Answering/rejecting an incoming phone call With an incoming call, the display alternately shows "IN CALL" and the number of the caller. The current audio source is muted and a ring tone is played via the loudspeakers of the car sound system. Note: If the number of the caller is not being transmitted, the display shows "IN CALL" instead of the number. If the number of the caller is stored together with a name in the car sound system, the name of the entry and the number are displayed (see the section "Storing a phone number in the car sound system" in this chapter). U Press the button < to answer the call. [. . . ] U Press the button 7 to confirm restoring the factory settings. The car sound system switches off and is reset to the factory settings. * Only in reception area "EUROPE" ** Only in reception areas "USA", "S-AMERICA" and "THAILAND" In the user menu, you can restore the original factory settings of the car sound system (see the chapter "User settings", section "Making settings in the "VARIOUS" menu", menu item "NORMSET"). 23 Useful information | Technical data Useful information Warranty We provide a manufacturer's warranty for products bought within the European Union. [. . . ]