User manual BLAUPUNKT MNCHEN CD 43

[. . . ] Operating instructions München CD 43 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 24 9 a b 23 9 22 a 21 20 19 18 ml kj h g d i fe dc 2 RADIO 3 CD 4 3 Table of contents Important information . . . . . . . . . . . . . . . . . . 16 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Telephone connection . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As soon as the desired programme has been found, press the PS button again to disconnect the function. NEDERLAND ITALIANO FRANÇAIS ENGLISH DEUTSCH The programme of this station will then be briefly sampled before the set starts seeking for the next station. As soon as the desired programme has been found, press the SCAN knob again to disconnect the function. using automatic station seek tuning This set allows you to store 3 x 5 stations on three FM storage levels. Use the FM·T button D to select the desired FM storage level. In the AM and LW mode 5 stations can be memorised on each band. Beyond that, the Travelstore function allows it to automatically store the 5 most powerful stations of the respective travelling area. Any station can then be recalled whenever required by touching the corresponding button. To memorise a station proceed as follows: If you wish to store an FM station choose the desired storage level by pressing the FM·T button D as many times as required. The display 9 j then gives you either I, II, III or T. Use rocker switch / F to tune in to a station/frequency of your choice. 22 To memorise it press any of the preset buttons ;, <, =, > or @ until the radio resumes play again (takes approximately 2 secs. ). From display 9 k you can see which preset button has been selected. Go through this procedure again if you want to memorise further stations on the other preset buttons and possibly on all wavebands and FM storage levels. If seek tuning locks onto a station stored already, the corresponding preset button will be indicated in the display for approximately 5 secs. (for FM stations the respective storage level will also be shown in display 9 j, k). using manual tuning To tune in to a station and store it you can also use rocker switch << >> G. Choose the desired waveband by pressing either the FM·T button D or the M·L button B. If you want to memorise an FM station, choose the storage level via the FM·T button D. Use the << >>> rocker switch G to tune in to the station/frequency of your choice. Store this frequency by pressing the corresponding preset button until the radio resumes play again. When tuning in to a station that has not been stored and turning the set off, this station will again be played as soon as the set is turned on again. This also applies for the last waveband selection. using Travelstore With the Travelstore function you can let the set automatically store the 5 strongest FM stations of the respective reception area and have them sorted according to their field strength. [. . . ] For this, proceed as follows: Press DSC 7. Press / F until "BP" lights up in display 9 a. Use << G to switch the BEEP on ("BP 1" in the display), and >> G to switch the BEEP off ("BP 0" in the display). This function can be adjusted separately for KeyCards 1 and 2. Technical data Theft protection This car radio cannot be operated unless the personal KeyCard is inserted. [. . . ]