User manual BLAUPUNKT MNCHEN RD104

[. . . ] Operating instruction München RD 104 1 PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS ENGLISH DEUTSCH 1 2 20 19 18 3 4 5 6 7 17 8 9 16 10 11 12 13 14 15 3 PORTUGUES ESPAGÑOL SVENSKA NEDERLAND ITALIANO FRANÇAIS ENGLISH Short description . . . . . . . . . . . . . . . . . . . . . . . . . 18 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Installation/hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] To switch off Preset Scan: · Press PS once again. The radio will continue to play the currently sampled station. SVENSKA NEDERLAND ITALIANO FRANÇAIS Storing the strongest stations automatically with Travelstore ENGLISH Changing the memory bank (FM) Note: If you tune into a station which has already been stored, the corresponding preset button and the memory bank will start flashing in the display for a short while. Recalling stored stations You can recall any stored station by pressing the corresponding preset button. · Select FM or TS and with FM also the desired memory bank. For this purpose, press FM until the desired memory bank is indicated on the display. DEUTSCH Sampling stations briefly with Radio Scan Starting with the currently played station, you may let the system sample the following ones one after another. To activate Scan: · Press PS for about 2 seconds. The sampled frequency or the station name starts flashing in the display. During the actual search process, "SCAN" is flashing. To continue listening to a sampled station/switch Radio Scan off: · Briefly press PS. If no station is selected during the search operation, the scan function will be automatically switched off after the entire frequency band has been passed through. The radio will then return to the initial station that was being played when the scan function was activated. For more information, please also refer to chapter "DSC programming - SCANTIME". program according to your personal needs. With PTY you are prepared for the future of RDS. You can now use the preset buttons to choose one out of six different program types. In the PTY mode the preset buttons no longer have their original function (see also chapter "DSC programming - PTY SET"). PTY and seek tuning First switch on the PTY mode and choose a program type (e. g. When the seek tuning function is activated via / , the radio will only capture those stations which transmit the selected PTY code. If no such station is found, the radio returns to the original mode. The display shows "SPORT" for approximately 3 seconds. PTY and scan First switch on the PTY mode and choose a program type (e. g. When the scan function is activated, the system will only sample those stations which transmit this PTY code. Reception of traffic announcements with RDS-EON (Enhanced Other Networks) Many FM broadcasters provide their service area with traffic messages at regular intervals. All traffic program stations transmit a special signal in parallel with the radio program, which is processed by the car radio. As soon as such a signal is received, the display shows "TP" (Traffic Program). Other radio stations do not air traffic announcements by themselves, but offer the possibility to receive the traffic announcements of another station within the same radio network. [. . . ] Achnowledgement tone for all functions where the respective button has to be hold down for more than 2 seconds to activate the function. Adjust volume between 0 and 9 (0 = OFF). The display brightness can be adjusted between 1 and 15. You may set one day and one night adjustment. [. . . ]