User manual BLAUPUNKT MODENA CD51

[. . . ] Radio / CD Modena CD51 München CD51 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 1 2 3 4 button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS convenience function on/off (radio data system). BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW (München CD51 does not feature MW and LW) TS, starts the Travelstore function. Display (display field) button - indicates the time on the display DIS, change display contents MENU button - selects the menu for basic settings 9 : ; < = > ?@ button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function X-BASS button to adjust and switch X-BASS on/off AUDIO button (Audio) - adjusts bass and treble, balance and fader Key block 1 - 6 TRAF button, switches traffic information standby on/off CD·C button - selects between CD, CD changer (if connected) and AUX sources 5 6 7 8 26 TABLE OF CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the or button : until "TEL/NAVI VOL" appears in the display. Set the desired volume with the buttons :. When the setting process is complete, press the MENU button 8 or OK ; twice. Note: You can adjust the volume level of telephone calls and of speech output as they are made with the volume control 2. Setting the volume for the confirmation tone If you hold down a button for longer than two seconds when using certain functions, e. g. storing a station on a station button, a confirmation tone (beep) sounds. The volume of this beep is adjustable. Press the MENU button 8. Press the or button : repeatedly until "BEEP" appears on the display. Adjust the volume using the and buttons :. "0" means the beep is off, "9" means maximum beep volume. When you have completed the setting, press either the MENU button 8 or OK ;. 32 RADIO MODE This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). Automatic station search mode Press the MENU button 8. Press the or button : repeatedly until "SENS" appears on the display. button :. Press the or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Press the Press either the or buttons :. The display shows the currently set value for sensitivity. "SENS HI6" denotes maximum sensitivity. If "SENS LO" is selected, "lo" appears on the display. Note: q You can only tune into stations manually if the RDS function has first been deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Use the buttons : to set the desired degree of sensitivity. tings, press the MENU button 8 or the OK buttons ;. When you have completed the set- Storing stations Storing stations manually Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW (München CD51 does not feature MW and LW). Tune into the desired station. Press the or button : to move to the next station on the broadcasting network. Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Travelstore function. q Hold down one of the preset station buttons 1 - 6 > on which you wish to store the station for more than two seconds. 34 RADIO MODE DEUTSCH Storing stations automatically (Travelstore) You can store the six stations with the strongest reception in the region automatically (only FM). The stations are stored in the FMT memory. Note: q Stations that were previously stored in this memory are deleted in the process. Ending SCAN, continuing to listen to a station Press the OK button ;. The scanning process is completed, the station last scanned remains active. Hold down the BND / TS button 5 for more than two seconds. [. . . ] Note: q Adjustments to tone and volume balance for traffic announcements can only be made during a traffic announcement. Setting the volume distribution left/right (balance) To set the volume distribution left/ right (balance), press the AUDIO = button. "BASS" appears on the display. Press the button : repeatedly until "BALANCE" appears on the display. Adjusting the bass Press the AUDIO = button. "BASS" appears on the display. Press the or button : to set the volume distribution left/right. Press the AUDIO = button once you have completed the setting. Press the the bass. or button : to set Press the AUDIO = button once you have completed the setting. Setting the volume distribution front/rear (fader) To set the volume distribution front/ rear (fader), press the AUDIO = button. "BASS" appears on the display. Adjusting the treble Press the AUDIO = button. "BASS" appears on the display. Press the Press the button : repeatedly until "TREBLE" appears on the display. or button : to set button : repeatedly until "FADER" appears on the display. Press the Press the the treble. or button : to set the volume distribution front/rear. Press the AUDIO = button once you have completed the setting. Press the AUDIO = button once you have completed the setting. 44 X-BASS X-BASS X-Bass means increased bass at low volumes. [. . . ]