User manual BLAUPUNKT MODENA CD52

[. . . ] Radio / CD Modena CD52 Valencia CD52 Modena CD53 Stockholm CD53 Operating instructions http://www. blaupunkt. com Open here 2 1 2 3 4 16 15 5 6 14 7 8 9 13 12 11 10 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 2 3 4 : ; < = > ?@ DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 5 6 7 8 button - unlatches the flip/ release panel Volume control Button - switches the radio and mute function on/off RDS button - switches RDS convenience function on/off (radio data system). BND button (band), source selection for radio mode, selection of FM memory levels and the wavebands MW and LW TS, starts the Travelstore function. Display (display field) button - indicates the time on the display DIS, change display contents MENU button - selects the menu for basic settings 9 button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function X-BASS button to adjust and switch X-BASS on/off AUDIO button (Audio) - adjusts bass and treble, balance and fader Key block 1 - 6 TRAF button, switches traffic information standby on/off SRC button - selects between CD, CD changer (if connected) and AUX sources 25 TABLE OF CONTENTS Notes and accessories . . . . . . . . . . . . . [. . . ] The telephone call or speech output can be heard when the traffic announcement has finished. The volume at which navigation output or telephone calls start is adjusted as follows: Press the MENU button 8. Press the or button : until "TEL/NAVI VOL" appears in the display. Set the desired volume with the buttons :. When the setting process is complete, press the MENU button 8 or OK ; twice. Note: You can adjust the volume level of telephone calls and of speech output as they are made with the volume control 2. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Setting the volume for the confirmation tone If you hold down a button for longer than two seconds when using certain functions, e. g. storing a station on a station button, a confirmation tone (beep) sounds. The volume of this beep is adjustable. Press the MENU button 8. Press the or button : repeatedly until "BEEP" appears on the display. Adjust the volume using the and buttons :. Automatic station search mode DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Tuning into a station Setting the sensitivity of the station search mode You can choose whether you wish to preset only strong or also poor-reception stations. Press the or button :. The unit tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Press the MENU button 8. Press the or button : repeatedly until "SENS" appears on the display. Press the button :. Press either the or buttons :. Note: You can only tune into stations manually if the RDS function has first been deactivated. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". The display shows the currently set value for sensitivity. "SENS HI6" denotes maximum sensitivity. "SENS LO1" is the minimum. Use the buttons : to set the desired degree of sensitivity. When you have completed the settings, press the MENU button 8 or the OK buttons ;. Storing stations Storing stations manually Press the or button : to move to the next station on the broadcasting network. Select the required FM memory level, FM1, FM2, FMT or either waveband MW or LW. Tune into the desired station. Note: If you want to use this feature, the RDS function must first be activated. You will then only be able to switch to stations that you have received once already. To do so, use the Scan or Travelstore function. Hold down one of the preset station buttons 1 - 6 > on which you wish to store the station for more than two seconds. 33 RADIO MODE Storing stations automatically (Travelstore) You can store the six stations with the strongest reception in the region automatically (only FM). The stations are stored in the FMT memory. Note: Stations that were previously stored in this memory are deleted in the process. Ending SCAN, continuing to listen to a station Press the OK button ;. The scanning process is completed, the station last scanned remains active. Setting the scanning time Press the MENU button 8. Press the or button : repeatedly until "SCANTIME" appears on the display. [. . . ] The minutes flash and can now be set. Press the Set the minutes using the buttons :. or button : repeatedly until "CLK DISP OFF" or "CLK DISP ON" appears on the display. or Press the Once the minutes have been set, press the button :. The hours now flash. button : to switch between ON and OFF. Press the MENU button 8 or OK ; once you have completed the setting. Set the hours using the tons :. or but- Press the MENU button 8 or OK ; twice, once you have completed the setting. Briefly viewing the time when the car radio is switched off In order to view the time when the car radio is switched off, Selecting the 12/24-hour clock mode Press the MENU button 8. "MENU" appears on the display. press the button / DIS 7. The time appears on the display for eight seconds. Press the or button : repeatedly until "24 H MODE" or "12 H MODE" appears on the display. 42 TONE AND VOLUME BALANCE You can adjust the sound settings for each source separately (radio, CD, CD changer, AUX and traffic announcement). The volume distribution settings apply to all the audio sources. Note: You can only adjust the audio settings for traffic announcements whilst a traffic announcement is actually being played. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Tone and volume balance Setting the volume distribution left/right (balance) To set the volume distribution left/ right (balance), press the AUDIO = button. [. . . ]