User manual BLAUPUNKT MODENA RD 148

[. . . ] Radio / CD Modena RD 148 Operating instructions 17 16 15 14 13 1 12 2 3 4 5 6 7 8 9 10 11 13 2 3 6 2 Contents Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 What you need to know . . . . . . . . . . . . . . . . . . . . . . . . 36 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This function is particularly convenient on longer trips. · Press the BND button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station. Scanning stored stations with Preset Scan You can briefly scan through all of the stored stations on all wavebands in the selected FM memory bank. Preset Scan cannot be started unless PTY has been switched off ("PTY" is not lit up in the display). To start Preset Scan: · Press SC for approximately 2 seconds. 41 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO Note: Should you attempt to store a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will flash briefly in the display. FRANÇAIS Switching between the memory banks (FM) The display will indicate which preset button is currently activated. ENGLISH If "AF" is not lit up, · press AF. This fulfils the requirements for selecting stations with << >>. Press the desired preset button until the radio resumes play after the muting (takes approximately 2 seconds, confirmed by a beep). Now the station has been stored. · If desired, stations can also be stored manually in the Travelstore bank (see "Storing stations"). DEUTSCH All of the stored stations on the selected waveband will be scanned one after the other. In the display "SCAN" will alternate with the flashing station name or frequency. To select a scanned station and switch off Preset Scan: · Press SC briefly. Changing the scan time The scan time can be selected from between 5 to a maximum of 30 seconds. If you would like to alter the scan time, please refer to the section on "DSC programming - SCANTIME". As reception deteriorates, the radio will gradually switch to mono. If you would like to switch to mono reception manually, please refer to the section on "DSC programming ­ STEREO/MONO". The display will briefly indicate the mode selected. Scanning stations with Radio Scan You can also scan through all of the stations in your reception area. To start the Scan function: · Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process "AMSCAN" or "FM-SCAN" will appear in the display. To select a scanned station and switch off the Radio-Scan function: · Press SC or the seek tuning rocker switch briefly. If no station is selected, the scan function will switch off automatically after the frequency band has run through completely. The radio will tune into the station selected before the scan started. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity). If "lo" does not light up, the radio will also pick up weaker, more distant stations (high sensitivity). [. . . ] (green/orange) Acknowledgement tone for all functions which require a button to be pressed for more than one second. The volume can be adjusted from between 0 to 9. "LO" stands for local reception. "DX" stands for distant reception. [. . . ]