User manual BLAUPUNKT MONTE CARLO 28

[. . . ] These instructions contain important information to easily and safely install and operate the device. ⷠRead these instructions carefully and completely before using the device. ⷠKeep the instructions at a location so that they are always accessible to all users. ⷠAlways pass on the device to third parties together with these instructions. [. . . ] This device can receive programmes broadcast over the FM frequency range as well as the MW and LW wavebands. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Six stations can be stored on the station buttons in each memory bank. The wavebands MW and LW can be switched on or off via the menu. To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, u press the BAND button >. You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. When you have finished making your changes, u press the MENU button 3 or wait 5 seconds. U Press and hold down one of the station buttons 1 - 6 = for longer than two seconds to assign the station to that button. The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. After the process has completed, the radio will play the station that is stored on station button 1 of the FMT memory bank. Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT SERVICE POP ROCK SCIENCE CHILDREN You can use the PTY function to select stations of a particular programme type. If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. notes: · If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep several times and "PTY NONE" appears briefly on the display. The radio will then retune to the station that it received last. ⷠIf the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode to the station whose programme type matches the one you selected. ⷠIf you do not want this PTY switching, disable PTY in the menu. U Select the waveband or memory bank with the BAND button >. u Press one of the station buttons 1 - 6 =. The stored station is played if it can be received. [. . . ] For further information, please read the note in the section entitled "Equalizer presettings (presets)". When you have finished making your changes, u wait 5 seconds. X-Bass allows you to increase the bass at low volume. When you have finished making your changes, u wait 5 seconds. [. . . ]