User manual BLAUPUNKT MUNCHEN RDM 169

[. . . ] Radio / CD München RDM 169 US Operating instructions 1 2 3 4 5 13 12 11 10 9 8 7 6 19 14 15 2 18 21 1 3 20 17 16 2 Condensed instructions . . . . . . . . . . . . . . . . 4 Remote control RC 08 . . . . . . . . . . . . . . . . . 11 Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Read the following before using the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All stored stations on the frequency band which can be received are sampled briefly in turn. "SCAN" and the flashing station name/frequency appear alternately on the display. Selecting sampled stations/terminating Preset Scan: · Press SCA or one of the rocker keys briefly. Calling up stored stations Automatically saving the strongest station with Travelstore You can store the six strongest FM and AM stations in the current reception region automatically in the order of field strength. This function is particularly useful on long journeys. Proceed as follows: · Press TU: menu level 2 is displayed. "T-STORE" flashes on the display. The six strongest FM stations are automatically stored on the "T" (Travelstore) memory level. If fewer than six stations can be received, four lines appear through the memory locations which are not occupied. When the procedure has been completed, the strongest station (ST 1) is selected. Stations can also be stored manually on the Travelstore level if required (see "Storing stations"). AM, AMT You can call up the stations on the selected frequency band directly: · Press the keys ST1 - ST6. Calling up stations on the other frequency band: · Press NEXT: the other frequency band is displayed. Then select the stored stations using ST1 -ST6. 18 Sampling stations with Radio Scan You can sample briefly the stations which can be received on the selected frequency band. Radio Scan can be started only when PTY is deactivated ("PTY" is not lit on the display). If necessary, deactivate PTY on menu level 2. Proceed as follows: Press TU and disable PTY using the PTY key. Switching on Scan: · Press SCA briefly. All stations on the frequency band which can be received are sampled briefly in turn. "SCAN" and the flashing station name/frequency appear alternately on the display. Selecting a sampled station/deactivating Scan: · Press SCA or one of the rocker keys briefly. If a station is not selected, Scan is switched off automatically when the seek function has passed through the complete frequency range. The station previously selected is played. · Changing the sampling time (Scan) The sampling time can be selected between 5 and 30 seconds. [. . . ] OFF - Amplifier Output power: 4 x 25 watts sinusoidal to DIN 45 324 at 14. 4 V 4 x 40 watts max. power Tuner Frequency bands: FM : 87. 7 ­ 107. 9 MHz AM : 530 ­ 1710 kHz FM sensitivity: 0. 7 µV at a signal-tonoise ratio of 26 dB. TUNER End DSC programming/store settings: · Press DSC. FM mono sensitivity: 7. 8 dBf FM transmission range: 20 - 16 000 Hz CD Transmission range: 20 - 20 000 Hz We reserve the right to make changes!32 AF ­ Alternative Frequency With RDS, this function ensures that the best frequency of the current program which can be received is selected automatically. Amplifier Power amplifier for increasing the output power. [. . . ]