User manual BLAUPUNKT NAVPACK RGN 08 GB 5

[. . . ] TravelPilot RGN 08 7 612 001 147 8 622 401 437 (GB)3. 98 7 612 001 147 Installation notes for authorired service workshopsIn 8 622 401 437/02. 98 -1- Table of contents Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation and connection regulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Notes on the operation of the equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Do not mount the antenna on roofs covered with leather or synthetic materials. When mounted on a roof (held only by a magnet), the antenna must not be exposed to temperatures of less than -20 °C or more than +80 °C. 8 622 401 437 If necessary, use protective sheathing to protect the antenna cable from being pinched. The adherent surface of the antenna must be free of dirt, snow, ice, etc. You must not lengthen, shorten or put a kink in the antenna cable. Do not remove the plug during the installation. If the antenna is painted the same colour as the vehicle, this may have an adverse effect on the reception, especially if paints containing a high percentage of metal are used. We assume no guarantee that the antenna will operate properly after it has been painted. On notchback vehicles, attach the antenna to the boot lid using the mounting brackets. Depending on the thickness of the metal, use the corresponding headless screws, Fig. On estate and hatchback cars, affix the antenna to the roof with its magnetic foot, Fig. For a roof mount, remove the mounting brackets. Use the adhesive strips enclosed to cover the screw holes, Fig. For estate and hatchback cars, lay the antenna cable along the rain gutter downwards and into the interior of the vehicle. Any obstacles near the antenna, such as roof racks or bicycle carriers, may have an adverse effect on or even obstruct satellite reception. Route the antenna cable into the interior of the vehicle and connect the plug on the antenna cable with the antenna jack on the basic unit. It is advisable to remove the antenna from the roof when driving through a car wash. If the GPS antenna is mounted inside the vehicle, there is no guarantee that the system will function correctly. The connection is made with the back-up light signal cable, see parts included in the delivery, item :, yellow plug to yellow jack of the sensor adapter cable (item 8) to the vehicle back-up light. Make sure that this connection is charged with + 12 V when the vehicle is reversing. Important: We assume no liability for equipment which has been connected incorrectly and any consequential damages! Distance calibration After the completion of all installation and connection work, it is necessary to perform a distance calibration. Insert the navigation CD into the basic unit and access the Service Menu. When the calibration has been completed, the main menu will ap-pear on the screen. Your RGN 08 will be ready for operation if at least 3 satellites can be received (approx. [. . . ] Now press the following keys one after another: 9, 5 and 7. the service menu will appear on the screen. Use the following keys to make and select settings in the service menu: / and / Moves the cursor. TIM key To page back through the menus. 1 2 3 4 5 S AUXILIARY MENU 6 NAVI EXIT 7 8 9 : S Service menu: Distance calibration 1. [. . . ]