User manual BLAUPUNKT NAVPACK RNS 149 AUST

[. . . ] · While you are driving, only use the voice output and directional symbols on the monitor. · Stop your vehicle at a suitable location if you wish to re-program the TravelPilot RGN 08 or look up more detailed information. Route guidance The current traffic routing situation can differ from the data stored on the CD-ROM. Due to system limitations, the TravelPilot RGN 08 cannot warn of altered traffic routing conditions e. g. If you do not pay attention to the actual traffic routing conditions, there is a danger that you will cause a serious accident. [. . . ] Afterwards, an arrow appears indicating the direction in which the destination lies. message is displayed and the voice output 16 S ROUTE OPTIONS MOTORWAY FERRY TOLL QUICK ROUTE START EXIT S CALCULATING. . . 219 km RÖMERRING indicates that: "The route is being calculated". The distance to the destination "as the crow flies" is also displayed. If you are travelling with your vehicle down a digitised street, you will be guided to your destination (after the route calculation has been completed) by spoken recommendations and by the directional symbols on the display The voice output volume can be adjusted during an announcement by pressing the + / ­ rocker switch. If you press the rocker switch, the latest voice announcement will be repeated. By pressing the rocker switch, you can deactivate voice output. To switch it on again press the rocker switch. You can exit the directional symbol display and go to the main navigation menu without interrupting route guidance by pressing one of the lower / function keys. Voice output will also be interrupted if you do this. By pressing START NAVIGATION you can switch the directional symbol display and voice output back on. To call up the traffic jam function, press the function key. upper left Example: You have entered a small town and are driving your vehicle between road turning A and turning B. The traffic information you hear on the radio informs you that there is a disruption to traffic between turning C and D. 20 S NDR 2 294 km 5:31 RÖMERRING 1. 2 km S TRAF. JAM AHEAD EXIT Press the upper left function key. A list of route sections that can be excluded will then appear. The first section in the list that can be excluded is the length of road starting from your current vehicle position up to the next possible turning but one, i. e. in this case this is the distance from your present vehicle position up to turning C. By function key, pressing the appropriate you can add the subsequent route section to this exclusion as well. Route sections that have been excluded are displayed inversely. In our example, this would be section 1900 m between C and D. [. . . ] Now the distance to the crossing has to be set. It is recommended to 50 METRES that the position be set using -M and M+ AHEAD. Now enter a destination in the usual manner and start route guidance. After the route has been calculated, the demo will run automatically. [. . . ]