User manual BLAUPUNKT OPEL RADIO SC 202

[. . . ] 13 Declaration of conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 BT Drive Free 112 This wireless Bluetooth hands-free system was developed specifically for users who want to use their cell phone while driving. [. . . ] Note: As soon as the charger is connected, the BT Drive Free 112 switches off. During the charging process, the MF button lights red. The battery is fully charged if the MF button is no longer lit. The charging process of the battery lasts approx. Disconnect the BT Drive Free 112 from the charger after it has been charged. A completely charged battery supports a talk time of up to 15 hours and a standby time of up to 500 hours. If the charge state of the battery becomes low, the MF button flashes red every 3 seconds and you hear a warning beep every 20 seconds. Note: If connected to an iPhone, the icon on the display of the iPhone shows the battery status of the BT Drive Free 112. 6 Overview 1 2 3 7 8 9 6 5 4 Loudspeaker MODE button Microphone Increase volume (+) MF button (illuminated multifunction button) Decrease volume (­) Mounting clip for the sun visor Charging socket (micro USB port) Battery compartment Switching on/off Switching on To switch the unit on, press the MF button for approx. 3 seconds until you hear a high-pitched signal tone and the MF button lights blue. Afterwards, the MF button lights blue and the device is switched on. Note: After switching on, the BT Drive Free 112 automatically connects with the last connected cell phone. Switching off To switch the unit off, press the MF button for approx. ­ Establishing a connection via the cell phone If the cell phone is not one of the two most recently connected cell phones with the BT Drive Free 112, you have to establish the connection via the Bluetooth menu of the cell phone. After successful connection, you can establish another connection with a second cell phone. This allows you to determine the sequence of connections. If two cell phones are connected with the BT Drive Free 112, the cell phone connected first is the first device and the other one the second device. Another connection can be established only after first disconnecting one of the two cell phones. The cell phone which is still connected afterwards becomes the first device in the sequence. Note that voice dialing is available only for the first device and the operation for redialling the last number differs for the first and the second device. The other functions are executed the same way using the BT Drive Free 112 as a connection with only one cell phone. 9 Using the BT Drive Free 112 After successfully completing the registration and charging the battery, the following functions can be executed: Making a call ­ Voice dialing* To activate voice dialing, briefly press the MF button. After the signal tone, speak the voice command. After the voice command has been recognized, the cell phone dials the number associated with it. Note: If two cell phones are connected with the BT Drive Free 112, the voice commands are directed only to the cell phone connected first. [. . . ] Press the MODE button again to cancel the muting. 10 Transferring a call To transfer a call from the BT Drive Free 112 to the cell phone, press the MODE button for 3 seconds. Repeat the step to transfer the call back to the BT Drive Free 112. Note: With some cell phones, the connection is disconnected if you transfer the call to the cell phone. To transfer the call back to the BT Drive Free 112, you have to briefly press the MF button instead of the MODE button. [. . . ]