User manual BLAUPUNKT ORLANDO CD 70

[. . . ] 34 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 International telephone information . . . . . . . 34 DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In order to use the Travelstore function Press the softkey, 4, indicating "SCA". The scanning process starts. "SCAN" is shown on the display for a short time, after which the current station name or the frequency is displayed, flashing. Scanning through the preset stations You can listen to short samples from all the stations saved on the various memory levels that can currently be received. The length of the samples can be set, in the menu, to between 5 and 30 seconds. Starting preset SCAN To start the preset scan press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Press the softkey, 4, indicating "TS". Storing starts. "T-STORE" appears in the display. When the procedure is complete, the station in memory location one on the FMT level is played. press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Going to a preset station Select the memory level or waveband. Press the softkey, 4, indicating from "ST1" to "ST6" for the desired station. Hold down the softkey, 4, indicating "SCA" for longer than one second. "SCAN" is shown on the display for a short time. "NO SHARX" means that the function is not active, while "SHARX ON" means that the bandwidth selection is operating automatically. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Press the Optimising radio reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor. When interference is being received, the treble is automatically cut, which therefore also reduces the level of interference. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. 45 NEDERLANDS Setting the PTY language You can select the language in which program types are displayed. Bandwidth selection in the presence of interference (SHARX) The SHARX function provides you with the facility of eliminating interference from neighbouring stations as far as possible. Switch on the SHARX function when stations are crowded. ITALIANO down one of the softkeys, 4, indicating "ST1" to "ST6", for more than one second. The program type is saved at the chosen location. Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. FRANÇAIS In order to save a program type, hold ENGLISH DEUTSCH Adjusting HICUT RADIO OPERATION Switching between stereo and mono When radio reception is poor you can switch the mode to mono. The changeover from stereo to mono is executed smoothly. The radio plays in stereo after being switched on. The selection of stereo or mono is made via the menu. TRAFFIC INFORMATION Traffic Information You car radio is equipped with an RDS-EON receiver. EON (Enhanced Other Network) stands for the broadcasting of station information within a broadcasting network. [. . . ] Select the adjustments for the sharpness of the individual filters "LO-Q-FAC", "MI-Q-FAC" or "HI-Q-FAC" with the or button, 7. Press the MENU button, 8. "MENU" appears in the display. To adjust the sharpness of the filter, press the or button, 7. or Press the In order to select the next filter, first press the OK button, 5, then the button, 7. tings, press the DEQ button, 6. or button, 7, as often as is necessary for "PEAK ON" or "PEAK OFF" to appear in the display. or buttons, 7, in order to switch the spectrometer on or off. [. . . ]