User manual BLAUPUNKT PALM BEACH C51

[. . . ] Radio / Cassette Palm Beach C51 Operating instructions 1 2 3 4 16 15 5 6 14 7 13 12 11 10 8 9 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH PORTUGUÊS ESPAÑOL CONTROLS 2 3 4 : ; < = DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 5 6 7 8 - button for unlatching the removable release panel Volume control Button for switching the device on and off and for muting the device RDS - button, for switching the RDS (Radio Data System) convenience function on or off Select display of running texts BND - (band) button for the selection of the radio source, selection of the FM memory levels and the MW or LW wavebands TS starts the Travelstore function Display - button for display of the clock time DIS, to change the contents of the display MENU - button, which calls up the basic settings menu 9 > ?@ - button for opening the fliprelease panel Arrow keys OK - button, for confirmation of menu entries and for starting the scan function DEQ - (Digital Equalizer) button, for switching the equalizer on and off AUD - (Audio) button for adjusting bass, treble, balance and fader LD, for switching the loudness function (hearing-weighted volume adaptation) on and off Buttons 1 - 6 TRAF - (Traffic) button, for switching the traffic announcements on and off CCD·C -button for choosing between tape cassette, CD-changer (if connected) and AUX 31 TABLE OF CONTENTS Notes and accessories . . . . . . . . . . 33 Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The tuner returns to the most recently received station. If the set station, or another station from the station chain, starts to transmit the desired program type at a later time, the device changes automatically from the current station, or out of CD or CD changer operation, and switches over to the station with the desired program type. Switching PTY on and off DEUTSCH Selecting the program type and starting the search Press the or button, :. If you want to change to a different program type, you can change to another by pressing the or button, :, while the type is displayed. Or Press one of the buttons 1 - 6, >, in order to change the program type stored for that button. The selected program type is briefly displayed. The next station with the selected program type is tuned in. often as is necessary for "PTY OFF" or "PTY ON" to appear in the display. or button, :, in order to switch PTY on or off. If PTY is switched on, PTY is illuminated on the display. Select a program type with the or button, :. OK, ;. 41 PORTUGUÊS Press the MENU button, 8, or ton 1 - 6, >, for longer than two seconds. The program type is saved at the chosen key 1 - 6, >. ESPAÑOL Press the Hold down the desired station but- SVENSKA Press the MENU button, 8. Press the or button, :, as Storing the program type on the station button NEDERLANDS Press the ITALIANO FRANÇAIS ENGLISH The current program type is shown on the display. RADIO OPERATION Optimising Radio Reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor (FM only). When interference is being received, the treble is automatically cut, which therefore also reduces the level of interference. Switching HICUT on and off Press the or button, :, in order to switch SHARX on or off. "SHARX OFF" means that the function is not active, while "SHARX ON" means that the automatic bandwidth selection is operating. OK, ;. Press the MENU button, 8, or Select Display of Running Texts Some radio stations use the RDS signal to transmit advertising or other information instead of the station name. These "running texts" are shown on the display. You can switch off the display of "running texts". Press the MENU button, 8. Press the or button, :, as often as is necessary for "HICUT" to appear in the display. Press the or button, :, in order to adjust the HICUT. "HICUT 0" means that the function is inactive, while "HICUT 3" indicates the strongest automatic reduction of the treble and the interference. OK, ;. Hold the RDS button, 4, pressed until "NAME FIX" appears on the display. In order to enable the display of "running texts" again, hold the RDS button, 4, pressed until "NAME VAR" appears on the display. Press the MENU button, 8, or Bandwidth selection in the presence of interference (SHARX) The SHARX function allows you to eliminate interference from neighbouring stations as far as possible (FM only). Switch on the SHARX function when stations are crowded. Switching SHARX on and off Adjusting the Display Under radio operation it is possible to choose between continuous display of the time or continuous display of the station name (or frequency). Hold the / DIS button, 7, pressed until the display you want appears. Press the MENU button, 8. Press the or button, :, as often as is necessary for "SHARX" to appear in the display. [. . . ] 12, 500 Hz Level: +2 to +4 EXTERNAL AUDIO SOURCES External Audio Sources In addition to the CD-changer you can connect an external audio source that has a line output. Such sources might be a portable CD player, a MiniDisc player or an MP3 player. If no CD-changer is connected, two external audio sources can be attached. The AUX input must be switched on in the menu. [. . . ]