Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT PARIS RCM 169. We hope that this BLAUPUNKT PARIS RCM 169 user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT PARIS RCM 169.
You may also download the following manuals related to this product:
BLAUPUNKT PARIS RCM 169 annexe 1 (343 ko)
Manual abstract: user guide BLAUPUNKT PARIS RCM 169
Detailed instructions for use are in the User's Guide.
[. . . ] When drilling a hole, be sure not to damage any vehicle part (battery, cable, fuse, etc. The positive cable must have a cross-section of at least 2, 5 mm2. Attention: Pay attention that the cables do not contact with the housing. [. . . ] Attention: Pay attention that the cables do not contact with the housing. Connection with QuickOut installed ex factory If your car is fitted with a QuickOut ex factory (at present Opel), the QuickOut ex factory has to be removed. Insert the car radio from the front into the support and push in until the stop springs on the sides engage right and left (distinct click to be heard). Insert the brackets right and left into the provided trimplate holes and push in until you hear a distinct click (lateral springs are unlocked). Note Locked brackets can only be removed after taking out the unit. Some Mercedes vehicles are equipped with a 10-pin connector located in the installation compartment. This connector must not be hooked up to car radio, since otherwise the positive supply line feeding the antenna or amplifier would be shortcircuited to ground! as a result , one of the conductive tracks in the radio would start burning. Prepare the car radio DIN cut-out (unlock shelf or dummy cover) or cut out the car radio compartment to 182 x 53 mm. Grasp behind the car radio cut-out and check how many of the fixing strips of the car radio support can be bent. note: Try to bend as many fixing strips as possible. Insert the support into the cut-out and bend the appropriate fixing strips with a screwdriver, see fig. If necessary, also use cables 7 607 647 093 and 7 607 648 000. When using the IR remote control, QuickOut operation is not possible. If you have connected a car telephone, your car radio will be mutet during telephone calls. Sätt in bilradion framifrån i fästanordningen och skjut in, tills hållfjädrarna på sidorna till höger och till vänster griper in (ett tydligt knäpp hörs). [. . . ] When using the IR remote control, QuickOut operation is not possible. If you have connected a car telephone, your car radio will be mutet during telephone calls. Sätt in bilradion framifrån i fästanordningen och skjut in, tills hållfjädrarna på sidorna till höger och till vänster griper in (ett tydligt knäpp hörs). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT PARIS RCM 169
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT PARIS RCM 169 will begin.
BLAUPUNKT PARIS RCM 169 annexe 1 (343 ko)
