User manual BLAUPUNKT PHOENIX CD70

[. . . ] Radio / CD Hamburg CD70 Phoenix CD70 Operating instructions Open here Ouvrir s. v. p. Por favor, abrir Favor abrir 2 1 14 2 13 3 12 4 11 10 5 9 8 6 7 3 ESPAÑOL SVENSKA NEDERLANDS PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH PORTUGUÊS OPERATING ELEMENTS 1 2 3 4 5 6 7 8 9 : ; < = button for opening the control unit Button for switching the device on and off and for muting the device Volume control Softkeys. The function of the Softkeys depends on the contents of the display at the time OK button for confirming menu entries and for leaving the menu DEQ button for calling up the equalizer menu Multi-function rocker MENU button, which calls up the basic settings menu AUD button for adjusting bass, treble, balance, fader and loudness DIS button, to change the contents of the display Display CD button, to start playing the CD CDC button, to start play from the CD changer (only if connected) or play from an external audio source (only if connected) TUNE button, to begin radio operation Calling up the radio function menu (only possible when the radio is switched on) > 4 CONTENTS Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Start pre-set SCAN To start the pre-set scan: Press the OK button, 5, or the MENU button, 8, to leave the menu. Note: The selected sample length also applies to scanning in CD, tape cassette, MiniDisc and CD changer mode (depending on how your device is equipped). Program type (PTY) As well as the station name itself, some FM stations also supply information about the type of program being broadcast. This information can be received and displayed by your radio. Such program types might include: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Using the PTY function, you can specifically select stations broadcasting a particular program type. If you carry out a PTY search, but no matching station is found, the search will be continued in the background. Press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. Hold down the softkey, 4, indicating "SCA" for longer than one second. "SCAN" appears briefly in the display. The memory levels are scanned one after another, and the memory location from "ST1" to "ST6" currently being sampled is displayed with light and shade reversed. 15 RADIO OPERATION As soon as a station of the selected type is found, the device switches from the present station, or out of CD, cassette tape, MiniDisc or CD changer mode (depending on how your radio is equipped) to the station with the selected program type. Activating PTY To use the PTY function: Or Select a saved program type by pressing one of the softkeys, 4, indicating "ST1" -"ST6". The selected program type is briefly displayed. In order to start the search: Press the or button, 7. Press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. The next receivable station with the selected program type is tuned in. Note: If no station is found with the chosen program type, a beep is heard and the display briefly shows "NO PTY". The tuner returns to the most recently received station. Storing program type on station buttons Press the softkey, 4, indicating "PTY". When PTY is switched on, the display briefly shows the last program type that was selected. To return to the basic radio menu: Select a program type with the button, 7. or Press the TUNE button, >, or wait for eight seconds. Deactivating PTY To save a program type, hold down one of the softkeys, 4, indicating "ST1" to "ST6", for longer than one second. The program type is saved at the chosen location. Press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. "PTY" appears in the display. Optimising radio reception Treble cut in the presence of interference (HICUT) The HICUT function improves the sound when radio reception is poor. When interference is being received, the treble is automatically cut which also reduces the level of interference. Setting HICUT Press the softkey, 4, indicating "PTY". "PTY" disappears from the display. [. . . ] tings, press the DEQ button, 6. you feel it should be. Now consult the "Equalizer adjustment guide" table for "Tone impression". Selecting the tone preset You can choose preset tone settings for the following musical styles. q ROCK q DISCO q JAZZ q CLASSIC q VOCAL Settings for these styles have already been programmed. scribed under "Action". Switching the equalizer on and off To switch off the equalizer, press the DEQ button, 6. "LOW EQ" is shown on the display. To switch off the equalizer, hold down the DEQ button, 6 until "DEQ OFF" briefly appears. Press the DEQ button, 6. 25 PORTUGUÊS Adjust the equalizer values as de- ESPAÑOL Compare the sound you hear with how When you have completed all the set- SVENSKA To adjust the sharpness of the filter, NEDERLANDS PORTUGUÊS ESPAÑOL Adjust the level with the or key, 7. In order to select the next filter, first FRANÇAIS ENGLISH Equalizer Adjusting the equalizer EQUALIZER Select "PRESET" with the ton, 7. [. . . ]