User manual BLAUPUNKT PORTO CD34

[. . . ] Radio / CD Porto CD34 San Remo CD34 Operating instructions 7 644 191 310 7 644 176 310 http://www. blaupunkt. com Open here 2 1 2 11 3 10 4 9 5 8 7 6 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 button for opening the detachable control panel (flip-release panel) Button to switch the device on/ off and operate the volume mute feature Volume control BND button (band) to select radio mode as the source, to select the FM memory banks and the MW and LW wavebands TS to start the Travelstore function AUDIO button to adjust the bass, treble, balance and fader. For adjusting the X-BASS function and activating/deactivating it. 6 7 8 9 : SRC button to switch between CD, CD changer (if connected) and AUX. Arrow buttons MENU button to open the basic settings menu Keys 1 - 6 TRAF button to switch traffic information standby on/off. RDS button to switch the RDS function on/off (Radio Data System). [. . . ] Press the or button 7 repeatedly until "MUTE LVL" appears in the display. press the MENU button 8. There are three memory banks available for the FM waveband (FM1, FM2 and FMT) and one for each of the MW and LW wavebands. Six stations can be stored in each memory bank. 34 RADIO MODE briefly press the BND·TS button 4. Tuning into a station There are various ways of tuning into a station. Automatic station seek tuning Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the or button 7. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press the button 7. Browsing through broadcasting networks (only FM) If a radio station provides several programmes, you have the option of browsing through its so-called "broadcasting network". Note: The RDS function must be activated before you can use this feature. Set the sensitivity level that you want using the buttons 7. When you have finished making your changes, press the MENU button 8. Note: You can set different sensitivity levels for FM and MW or LW (AM). Press the 35 DANSK or button 7 to switch to the next station on the broadcasting network. PORTUGUÊS ESPAÑOL SVENSKA Press the or button 7. The display shows the currently set sensitivity level. "SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. NEDERLANDS peatedly until "SENS" appears in the display. ITALIANO The radio tunes into the next receivable station. Press the MENU button 8. Press the or button 7 re- FRANÇAIS ENGLISH DEUTSCH To switch between the FM memory banks (FM1, FM2 and FMT) and the MW and LW wavebands, Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the Scan or Travelstore function. RADIO MODE Storing stations Storing stations manually Listening to stored stations Select the memory bank or waveband. Select the memory bank (i. e. FM1, FM2, FMT) that you want or one of the wavebands (MW or LW). Tune into the station that you want. Press the station button 1 - 6 9 that corresponds to the station that you want to listen to. Press and hold down one of the station buttons 1 - 6 9 for longer than two seconds to assign the station to that button. Scanning receivable stations (SCAN) You can use the scan function to briefly play all the receivable stations. You can set the scanning time in the menu to between 5 and 30 seconds. Starting SCAN Storing stations automatically (Travelstore) You can automatically store the six stations providing the best reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Press and hold down the MENU button 8 for longer than two seconds. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station Press and hold down the BND·TS button 4 for longer than two seconds. "FM TSTORE" appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. Press the MENU button 8. Scanning stops and the radio continues playing the station that it tuned into last. Setting the scanning time Press the MENU button 8. Press the or button 7 repeatedly until "SCAN TIME" appears in the display. Set the scanning time that you want using the buttons 7. 36 RADIO MODE DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH When you have finished making your changes, press the MENU button 8 twice. Note: The scanning time that you set is also applied by the system to scanning carried out in CD and CDchanger mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. [. . . ] When you have finished making your changes, or button 7 to adjust the balance (right/left). When you have finished making your changes, press the AUDIO button 5. Adjusting the front/back volume distribution (fader) To adjust the front/back volume distribution (fader), Press the press the AUDIO button 5. "BASS" appears in the display. press the AUDIO button 5. Adjusting the treble Press the AUDIO button 5. "BASS" appears in the display. Press the button 7 repeatedly until "FADER" appears in the display. Press the Press the button 7 repeatedly until "TREB" appears in the display. or button 7 to adjust the treble. [. . . ]