User manual BLAUPUNKT SAINT TROPEZ RCM 168

[. . . ] Radio / Cassette Saint Tropez RCM 168 Ravenna RCM 168 Rimini RCM 169 Las Vegas DJ Operating instructions 1 2 3 4 5 6 7 8 9 10 10 3 25 PORTUGUÊS 2 9 ESPAÑOL SVENSKA Remote control RC 08 (optional) NEDERLANDS 17 16 15 14 13 12 11 ITALIANO FRANÇAIS ENGLISH DEUTSCH Display The display consists of three fields and varies according to the operating mode and function. Display field 1: Radio mode Memory banks and wavebands Brief indication of preset station (e. g. P1) Cassette mode CAS - cassette inserted MTL - tape type Changer mode Current track Audio Numeric and graphic representation of volume and audio settings DSC Permanent display for DSC programming. Graphic representation of the adjusted volume level. Display field 2: Radio mode Radio frequency or station name PTY programme type Clock display Cassette mode TAPE1/TAPE2 - side of tape playing Active functions (e. g. CPS) Clock display Changer mode Current CD playing CD time (elapsed time), CD name, CD number and Brief indication of changes in function Clock display DSC Serves as display and input field during DSC programming Clock display Miscellaneous Indicates new source (e. g. [. . . ] Manual tuning: · Press << >>; the frequency will change in short intervals in the corresponding direction. If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up. Storing stations On FM, you can store six stations on the preset buttons 1, 2, 3, 4, 5, 6 for each of the memory banks (1, 2, T). On MW/LW, you can also store six stations each. · Select the appropriate waveband by pressing BA/TS. · Tune into a station with the rocker switch (either automatically / or manually <</>>). · Press the desired preset button until the radio resumes play after the muting (takes approx. The display will indicate which preset button is currently activated. 36 Automatically storing the strongest stations with Travelstore You can automatically store the six FM stations with the most powerful signals in your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the BA/TS button for 2 seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the strongest station. If desired, stations can also be stored manually in the Travelstore bank (see "Storing stations"). Scanning stored stations with Preset Scan You can scan all of the stored stations on any of the wavebands and in the selected FM memory bank. To start Preset Scan: · Press SCA for approx. All of the stations stored on the waveband will be scanned one after the other. "PSSCAN" will appear in the display, alternating with the station name or frequency. The abbreviation for the station currently playing (e. g. Continue listening to a scanned station/ end Preset Scan: · Press SCA briefly. To select a scanned station/switch off the Scan function: · Press SCA briefly. Changing the scan time The scan time can be selected from between 5 to a maximum of 20 seconds. If you would like to alter the scan time, please refer to the section on "DSC programming - SCANTIME". Selecting the automatic tuning sensitivity You can alter the automatic tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity). If "lo" does not light up, the radio will also pick up weaker, more distant stations. If you would like to alter the sensitivity level please refer to the section on "DSC programming - SENS". Recalling stored stations You can recall any stored station at the touch of a button. [. . . ] Use the / buttons on the rocker switch to select the functions you wish to change. The display will show you the setting you have selected. Press << >> on the rocker switch to change the values. Confirm the setting you have selected by pressing the DSC button. [. . . ]