User manual BLAUPUNKT SAN DIEGO CM45

[. . . ] Long press: Switches convenient RDS function on/off. > SRC/ button Short press: Switching sources between CD/MP3, CD changer (if connected) and AUX. BND/TS button Short press: Selects the FM memory banks and the MW and LW wavebands. Long press: Starts the Travelstore function. 8 ESC button Confirm menu item and return to the display of the MENU or AUDIO main level. [. . . ] 40 Setting the scanning time u Press the MENU button :. u Press the or button 6 repeatedly until "SCAN TIME" appears on the display. u Set the desired scanning time using the buttons 6. Radio mode When you have finished making your changes, u press the MENU button : twice. Note: The defined scanning time is also applied by the system to scanning carried out in CD and CD changer mode. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK MUSIC You can use the PTY function to select stations of a particular programme type. PTY-EON If you specify the programme type and start seek tuning, the radio will switch from the current station to a station of the selected programme type. Notes: · If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly on the display. The radio will then retune to the station that it received last. · If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CD-changer mode to the station whose programme type matches the one you selected. · If you do not want this PTY EON switching, disable it in the menu with "PTY off". u Press the or button 6 repeatedly until "HICUT" appears on the display. u Press the or button 6 to adjust the HICUT setting. "HICUT 0" means no automatic reduction of the interference level, "HICUT 1" means automatic reduction of the interference level. u Press the MENU button :. 42 Traffic information CD mode If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. CD mode You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. Labelled or shaped CDs can damage the CD drive. Do not attach labels to CDs since the label may detach during operation. ENGLISH Setting the volume for traffic announcements u Press the MENU button :. u Press the or button 6 repeatedly until "TA VOLUME" appears on the display. butu Adjust the volume using the tons 6. When you have finished making your changes, u press the MENU button : twice. Notes: · Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. · The volume distribution can be adjusted for traffic announcements. [. . . ] Adjusting the X-BASS boost u Press the AUDIO button ;. "BASS" appears on the display. u Press the button 6 repeatedly until "XBASS" appears on the display with the current setting. u Press the or button 6 repeatedly until the desired setting appears on the display. [. . . ]