User manual BLAUPUNKT SAN DIEGO MP35

[. . . ] Radio / CD / MP3 Calgary MP35 San Diego MP35 Operating instructions 7 645 170 310 7 645 190 310 http://www. blaupunkt. com 2 1 3 4 5 6 7 13 12 11 10 9 8 2 CONTROLS 1 Button to switch the device on/ off and operate the volume mute function. button for detaching the control panel (release panel). Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. MENU button Short press: Open the settings menu. [. . . ] The radio will then retune to the station that it received last. If the tuned radio station or another station on the broadcasting network broadcasts your selected programme type at a later point in time, the radio will automatically switch from the currently tuned station or from CD mode or CDchanger mode to the station whose programme type matches the one you selected. Switching PTY on/off Selecting the PTY language You can select the language in which the programme types are displayed. The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". Press the MENU button 7. Press the or button 8 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 8. the When you have finished adjusting the setting, press the MENU button 7 twice. Selecting a programme type and starting seek tuning Press the or button 8. The current programme type appears in the display. If you want to select another programme type, you can do so by pressing the or button 8 whilst this display is visible. The selected programme type appears briefly in the display. Press the MENU button 7. Press the or button 8 repeatedly until "PTY ON" or "PTY OFF" appears in the display. Press the Press the or button 8 to switch PTY ON or OFF. Press the MENU button 7. or button 8 to start seek tuning. The radio will then tune into the next station it finds that matches your selected programme type. 40 RADIO MODE HICUT The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the interference level is cut automatically. Switching HICUT on/off DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Optimising radio reception Press the MENU button 7. Press the or button 8 repeatedly until "TUN DISP" appears in the display. or button 8 to switch between "CLOCK" and "FREQUENCY". Press the Press the MENU button 7. Press the or button 8 repeatedly until "HICUT" appears in the display. or button 8 to adjust the HICUT setting. "HICUT 0" means that the interference level will not be cut automatically. "HICUT 1" means that it will be cut automatically. Press the MENU button 7 twice. Press the Press the MENU button 7. Configuring the display In radio mode you have the option of displaying the waveband together with the memory bank / memory location and the time or the station name / frequency of the current station. Select "FREQUENCY" to display the station name / frequency or select "CLOCK" to display the waveband together with the memory bank / memory location and the clock time. 41 TRAFFIC INFORMATION Traffic information Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme you were listening to before. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. [. . . ] "XBASS OFF" means that the X-BASS function is switched off. Adjusting the X-BASS boost LEVEL DISPLAY DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Configuring the level display The level display temporarily provides you with a symbolic representation of the volume and audio settings whilst you are adjusting them. When you are not changing any settings, the level display depicts the peak music/speech output. You can switch the level display on/off. Press the MENU button 7. "MENU" appears in the display. Press the X-BASS button 9. [. . . ]