User manual BLAUPUNKT SANTA CRUZ MP34

[. . . ] Radio / CD / MP3 Milano MP34 Santa Cruz MP34 Valencia MP34 Operating instructions 7 644 192 310 7 644 178 310 7 644 195 310 http://www. blaupunkt. com Open here 2 1 2 11 3 10 4 9 5 8 7 6 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 button for opening the detachable control panel (flip-release panel) Button to switch the device on/ off and operate the volume mute feature Volume control BND button (band) to select radio mode as the source, to select the FM memory banks and the MW and LW wavebands TS to start the Travelstore function AUDIO button to adjust the bass, treble, balance and fader. For adjusting the X-BASS function and activating/deactivating it. 6 7 8 9 : SRC button to switch between CD/MP3, CD changer (if connected) and AUX. Arrow buttons MENU button to open the basic settings menu Keys 1 - 6 TRAF button to switch traffic information standby on/off. RDS button to switch the RDS function on/off (Radio Data System). [. . . ] The following are available: "DEUTSCH", "ENGLISH" and "FRANÇAIS". Optimising radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the system automatically reduces the treble thus reducing the interference level. Switching HICUT on/off Press the MENU button 8. Press the or button 7 repeatedly until "HICUT" appears in the display. Press the or button 7 to adjust the HICUT setting. "HICUT 0" means that no automatic reduction of the treble and interference level will be made; "HICUT 1" means that a maximum reduction will be made. Press the MENU button 8. Press the or button 7 repeatedly until "PTY LANG" appears in the display. Set your preferred language using buttons 7. the When you have finished making your changes, press the MENU button 8 twice. Selecting a programme type and starting seek tuning Press the or button 7. The current programme type appears in the display. Press the MENU button 8. Configuring the display In radio mode you have the option of displaying the waveband together with the memory location and the time or the station name. Press the or button 7 repeatedly until "TUN DISP" appears in the display. Press the or button 7 to switch between "CLOCK" and "FREQUENCY". Select "FREQUENCY" if you want to display the station name / frequency. If you want to select another programme type, you can do so by pressing the or button 7 whilst this display is visible. The selected programme type appears briefly in the display. Press the or button 7 to start seek tuning. The radio will then tune into the next station that it finds that corresponds to your selected programme type. Press the MENU button 8 twice. 44 TRAFFIC INFORMATION Your device is equipped with an RDSEON receiver. Whenever a traffic announcement (TA) is broadcast, the system switches automatically from a station that does not provide traffic reports to the appropriate traffic information station within the broadcasting network that does. Once the traffic report has been played, the system will switch back to the programme that you were listening to before. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic information If you hear the warning sound, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. Adjust the volume using the buttons 7. When you have finished making your changes, Switching traffic information priority on/off Briefly press the TRAF button :. Traffic announcement priority is active when a traffic-jam symbol lights up in the display. Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD/MP3 or CD in the changer, you leave the reception area of a traffic information station that the system is tuned into, and the subsequent automatic search cannot find a new traffic information station. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. press the MENU button 8 twice. Note: Using the volume control 3, you can also adjust the volume during a traffic announcement for the duration of that announcement. Note: You can adjust the sound settings and volume distribution settings for traffic announcements. [. . . ] Adjusting the treble Press the AUDIO button 5. "BASS" appears in the display. Press the button 7 repeatedly until "FADER" appears in the display. Press the Press the button 7 repeatedly until "TREB" appears in the display. or button 7 to adjust the fader (front/back). When you have finished making your changes, Press the or button 7 to adjust the treble. When you have finished making your changes, press the AUDIO button 5. press the AUDIO button 5. 57 SOUND Equalizer presets This device is equipped with an equalizer that has been preset with settings for the "ROCK", "POP" and "CLASSIC" music styles. To select an equalizer preset, X-BASS X-BASS The X-BASS feature can be used to boost the bass at low volume levels. [. . . ]