User manual BLAUPUNKT SEATTLE CR44

[. . . ] Quand vous vous trouvez en dehors de l'Amérique du nord ou de l'Amérique latine, sélectionnez l'option « AREA EUR ». Pour plus d'informations, reportez-vous à la section « Réglage du tuner » du chapitre « Mode RADIO ». Atención: El sintonizador del equipo sale de fábrica programado para la región de Norteamérica / Sudamérica ("AREA USA"). Si se encuentra fuera de la región de Norteamérica / Sudamérica, seleccione la opción "AREA EUR". [. . . ] Note: You can only tune into stations manually if the RDS function is deactivated. Move the joystick 8 up/right or down/left to adjust the sensitivity. You can adjust the sensitivity in steps from 1 to 6. "SENSITIVITY 1" is the lowest setting and "SENSITIVITY 6" is the highest sensitivity setting for distant stations. Press the joystick OK 8 or the MENU button 9 to close the menu. The settings are saved. Move the joystick 8 left or right. Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Scanning receivable stations (SCAN) You can use the scan function to briefly play all the receivable stations. You can set the scanning time to between 5 and 30 seconds in the menu. Starting SCAN Press the TUNER button = while in radio mode. The radio functions menu appears in the display. Press and hold down the joystick OK 8 for longer than two seconds. "SCAN" appears briefly in the display followed by the current station name or frequency of the station. Cancelling SCAN and continuing listening to a station Press the NEXT button 4. Note: If you open the radio functions menu while in AM radio mode, the softkey assigned to the "SENS" display item will appear on the first page. Press the softkey 5 assigned to the "SENS" display item. Press the joystick OK 8. Scanning stops and the radio continues playing the station that it tuned into last. 18 RADIO MODE Setting the scanning time Press the MENU button 9. Press the softkey 5 assigned to the "VARIOUS" display item. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Storing stations automatically (Travelstore) You can automatically store the six stations offering the best reception in the region. If interference occurs, the system automatically reduces the treble thus reducing the interference level. Setting HiCut DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Optimising radio reception Activating/deactivating the radio text display Some stations use the RDS signal to broadcast scrolling texts known as radio texts. You can allow radio texts to be displayed or you can block them. Press the TUNER button = while in radio mode. The radio functions menu appears in the display. Press the TUNER button = while in radio mode. The first page of the radio functions menu is displayed. Repeatedly press the softkey 5 assigned to the "R-TEXT" display item until the "RADIO TEXT ON" or "RADIO TEXT OFF" setting that you want is displayed. Press the NEXT button 4. Repeatedly press the softkey 5 assigned to the "HIGH CUT" display item until the setting that you want appears in the display. "HICUT 0" means that no automatic reduction of the treble and interference level will be made; "HICUT 2" means that a maximum reduction will be made. Press the TUNER button = or the joystick OK 8. The settings are saved. Press the joystick OK 8 or the TUNER button = to close the menu. The settings are saved. 21 CD MODE CD mode You can use this device to play standard CDs with a diameter of 12 cm. CDRs and CD-RWs (CDs that you have "burned" yourself) can generally also be played. Due to the varying quality of CD blanks, Blaupunkt cannot guarantee that this will work properly. [. . . ] The "AMP ON" softkey will be displayed with a dark background if the internal amplifier is switched on. Press the softkey 5 assigned to the "AUX1" display item if no CD changer is connected and you want to connect an external audio source. By pressing the "AUX1" softkey you can switch between the "AUXILIARY 1 ON" and "AUXILIARY 1 OFF" settings. Press the joystick OK 8 or the MENU button 9 to close the menu. The settings are saved. 38 EXTERNAL AUDIO SOURCES the "AUX2" display item. By pressing the "AUX2" softkey you can switch between the "AUXILIARY 2 ON" and "AUXILIARY 2 OFF" settings. [. . . ]