User manual BLAUPUNKT SEATTLE MP74

[. . . ] Radio / CD / MP3 Los Angeles MP74 US Seattle MP74 US Operating instructions 7 644 816 310 7 644 811 310 http://www. blaupunkt. com Caution: The device's tuner is already configured at the factory for the North/South America region ("AREA USA"). If you are outside North/South America, please select the "AREA EUR" setting. For further details, please read the section entitled "Adjusting the tuner settings" in the "Radio mode" chapter. Attention : Le récepteur de l'autoradio est réglé par défaut sur la région Amérique du Nord / Amérique latine (« AREA USA »). [. . . ] Press the softkey 5 assigned to the "VARIOUS" display item. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Storing stations automatically (Travelstore) You can automatically store the six stations offering the best reception in the region. The stations are stored in the FMT or AMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Starting the Travelstore function Press the softkey 5 assigned to the "SCANTIME" display item. Move the joystick 8 up/right or down/left to adjust the scanning time. Press the joystick OK 8 or the MENU button 9 to close the menu. Note: The scanning time that you set is also applied by the system to scanning carried out in CD/MP3 mode and CD-changer mode. Press the TUNER button = while in radio mode. The radio functions menu appears in the display. Press the softkey 5 assigned to the "T-STORE" display item. "TRAVEL STORE" appears in the display. After the process is completed, the radio will play the station that is stored in location 1 of the FMT (or AMT) memory bank. Storing stations Storing stations manually Select the memory bank that you want: FM1, FM2, FM3, FMT or AM1, AM2, AMT. Tune into the station that you want as described in the section entitled "Tuning into a station". Listening to stored stations Select the memory bank or waveband. Press the softkey 5 that is assigned to the station name or frequency of the station that you want to listen to. Press one of the six softkeys for longer than two seconds to assign the station to that softkey. 19 RADIO MODE Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme that they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. Note: If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. Activating PTY To use the PTY function, Deactivating PTY To switch off the PTY function, Whilst the programme types are being displayed, press the softkey 5 assigned to the "PTY OFF" display item. Selecting a programme type and starting seek tuning The PTY menu comprises several pages on which the known programme types are displayed. To browse through the PTY menu's pages, press the NEXT button 4 repeatedly until the programme type that you want appears alongside one of the softkeys. Press the softkey 5 assigned to the programme type that you want. Move the joystick 8 up/right or down/left to start seek tuning. The next receivable station corresponding to your selected programme type will then be tuned into. If the tuner does not find a station that corresponds to the selected programme type, you will hear a beep and "NO PTY" appears briefly in the display. The radio will then retune to the station that it received last. Note: If you want to switch back to the programme types display, press the TUNER button = while in radio mode. The radio functions menu appears in the display. Press the NEXT button 4. Press the softkey 5 assigned to the "PROG TYP" display item. If PTY is activated, the display shows the current programme type. [. . . ] Note: If a CD changer is connected, you cannot change the "AUX1" input. press the joystick 8 to the left or right to move the input marker. Enter the letter that you want by ENGLISH pressing the joystick 8 up or down. Once you have finished entering the name, press the joystick OK 8 or the MENU button 9 to close the menu. The settings are saved. Press the joystick OK 8 or the MENU button 9 to close the menu. Note: If the AUX inputs are activated, you can select them by pressing the SOURCE button <. Naming the AUX input You can give each AUX input a name so you can recognise them more easily when selecting them using the SOURCE button < (e. g. you can give them the device names that they are connected to). the "AUX" display item. [. . . ]