User manual BLAUPUNKT ST. LOUIS CC24

[. . . ] without this control panel , the car radio is worthless to a thief. Protect your equipment against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle - not even in a hiding place. Never expose the control panel to direct sunlight or other heat sources. [. . . ] Six stations can be stored on each memory bank. Selecting the FM memory bank To switch between the FM memory bank FM1, FM2 and FMT, press the BAND/TS button =. Selecting the AM waveband To select the AM waveband, keep pressing the BAND/TS button = until AM appears in the display. If your unit is connected to a mobile telephone, the car radio's volume will be muted as soon as you "pick up" the telephone. "TEL CALL" flashes in the display. This requires to the mobile telephone be connected to the car radio as described in the installation instructions. There are various ways of tuning to a station. The unit tunes to the next receivable station. 1-6 < for longer than one second to store the station in that preset memory. You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception. 8 until "SENS HI" or "SENS LO" appears in the display "SENS HI" means that the tuner is set high to sensitivity. To play the tracks on the current CD in random order, briefly press button 4 (MIX) <. "S--MIX" appears briefly in the display. To play the tracks on all inserted CDs in random order, keep the 4 (MIX) button < pressed for longer than two seconds. "D--MIX" appears briefly in the display. Canceling MIX To stop the tracks from being played in random order, press button 4 (MIX) < until "S--MIX" or "D--MIX" disappears and the standard CD changer display reappears. "S--SCN" appears in the display. Scanning the first track on all CDs You can briefly play the first track all CDs in the CD changer. The currently scanned track will then continue to be played normally. note: You can set the scanning time (scantime). For further details, read the section entitled "Setting the scantime" in the "CD mode" chapter. Scanning tracks on the current CD To briefly play all the tracks on the current CD in ascending order, press button 2 (SCAN) <. [. . . ] You can select preset sound effect for the following styles of music: CLASSIC POP M ROCK M The settings for these music styles have already been programmed. To select one of the sound presets, keep pressing the EQ/X-BASS button ; until the required setting appears in the display. If you want to deactivate the sound preset, keep pressing the EQ/X-BASS button ; until "DSP OFF" appears in the display. Power 4 x 15 watts sine in accordance with DIN 45 324 at 14. [. . . ]