User manual BLAUPUNKT SYDNEY RCM126

[. . . ] Contents Key Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Audio Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cassette Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 4 4 4 4 Station tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Please refer to chapter "DSC programming - SCANTIME". If reception is poor, you may get better sound quality by switching to mono: l Press the lo button for approximately two seconds. With mono playback, the stereo Sign OJ will disappear from the display. Each time the radio is switched on, stereo playback is activated. The unit will automatically switch to mono if the received signal is not strong enough for stereo playback. To select a scanned station and switch off Preset Scan: l Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. If "lo" is displayed, the radio will only pick up strong, local stations (low sensitivity). If "lo" does not light up, the radio will also pick up weaker, distant stations (high sensitivity). The sensitivity level can be altered in both modes (see also chapter "DSC programming"). Press SC briefly. PTY - Program Type PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their program type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Scanning stations with RadioScan You can also scan all stations which can be received. To start the Scan function: l Press SC briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process "FM-SCAN" or "AM-SCAN" will be displayed. Switching PTY on/off l To select a scanned station and switch off the Radio-Scan function: l Press SC briefly. Press PTY. When the function is active, the program type selected last will briefly appear in the display. "PTY" will be permanently indicated in the lower right corner of the display panel. 16 Program types Use cc>> to have the last selected program type displayed and to choose a new one. You can select any one of the stored types with the preset buttons 1 - 6. All of the program types listed below are available. The letters printed in bold are identical to the actual short-time indication in the display. NEWS INFORM SPORTS TALK ROCK CLS ROCK ADLT HIT SOFT RCK TOP 40 COUNTRY OLDIES SOFT NOSTALGA JAZZ CLASSICL R&B SOFT R&B LANGUAGE REL MUSC REL TALK PERSNLTY PUBLIC TEST (used for factory testing) PTY 23 to PTY 29 have not been assigned. Checking the program type of the station l If you wish to listen to a station with this PTY, press NV to start seek tuning operation. If the system is unable to find a station offering the selected program type, the display will show "NO PTY" and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different program types to each preset position. [. . . ] l DON'T connect the left and riqht speaker leads to each other or to the same speakers. l DON'T connect the front and year speaker leads to each other or to the same speakers. l DON'T connect the negative speaker leads to each other. l DON'T connect the positive speaker leads to each other. [. . . ]