User manual BLAUPUNKT TORONTO RDM126

[. . . ] Contents FCC warning for USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD Player & DMS CD Changer Control Feature Highlights: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 5 5 5 5 Radio operation with RDS . . . . . . . . . . . [. . . ] Checking the program type of the station Press PTY for approximately two seconds. After the beep tone the display will show the program type offered by the tuned in station. ~~ _ l PTY - Program Type PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their program type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off Press P T Y . When the function is active, the program type selected last will briefly appear in the display. "PTY" will be permanently indicated in the lower right corner of the display panel. l NEWS INFORM SPORTS TALK ROCK CLS ROCK ADLT HIT SOFT RCK TOP 40 COUNTRY OLDIES SOFT NOSTALGA JAZZ CLASSICL R&B SOFT R&B LANGUAGE Displaying the selected program type Press << or >z-. The program type selected last will be displayed briefly. l Selecting a program type a) Using the preset buttons When PTY is switched on, you can use the preset buttons l-6 to select the program types stored at the factory. The selected program type will be displayed for two seconds. l 17 `?, . If you wish to listen to a station with this PTY, press A/V to start seek tuning operation. If the system is unable to find a station offering Ihe selected program type, the display will show "NO PTY" and a beep tone will be released. The station received before starting seek tuning will be tuned in. You can assign different program types to each preset position. Please refer to the next chapter "Storing program types". l If the system is unable to find a station offering the selected program type, the display will show "NO PTY" and a beep tone will be released. The station received before starting seek tuning will be tuned in. Emergency Alert System Your RDS tuner is also able to automatically receive any RDS emergeny announcements broadcast during extraordinary circumstances. Storing program types One program type was assigned to each of the preset buttons l-6 at the factory. If desired, you can also store other available program types. To do so, make sure that "PTY" lights up in the display. If necessary, press the PTY button to switch on the function. l %_ -- b) Using the cc >z buttons of the rocker switch When PTY is switched on, you can select a program type using buttons c< >>. l Notice: As earlier mentioned, these functions are currently only supported by a limited number of RDS stations. . . Select a program type using buttons cc >> and Press cc or >>; the program type selected last will be displayed for three seconds. During this period press z-> (forwards) or cc (backwards) to select the desired type. Press cc or >> as many times as required. l hold down the desired preset button (1-6) until you hear a beep. Now the selected program type can be recalled by pressing this preset. [. . . ] l DON'T connect the left and riqht speaker leads to each other or to the same speakers. l DON'T connect the front and year speaker leads to each other or to the same speakers. l DON'T connect the negative speaker leads to each other. l DON'T connect the positive speaker leads to each other. [. . . ]