User manual BLAUPUNKT TORONTO RDM128

[. . . ] Radio / CD Toronto RDM 128 Operating instructions 1 20 19 2 3 4 5 6 7 17 8 9 10 11 12 14 13 16 15 18 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH ENGLISH Contents Quick reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If necessary, deactivate these functions: · Press AF or PTY. Manual tuning: · Press << >>; the frequency will change in short intervals in downwards or upwards direction. When holding the right or left part of the rocker switch depressed, the frequency scan is speeded up. · Changing the memory bank (FM) Notice: You can shift between the memory banks I, II and T in order to store stations and recall them later. The currently selected memory bank is indicated in the display. Should you tune in a station which has already been stored before on another memory bank, the corresponding preset button and the memory bank will briefly flash in the display. 41 PORTUGUÊS ESPAÑOL SVENSKA Press the desired preset button until the radio resumes play after the muting (takes approximately two seconds, confirmed by beep). The activated preset button is indicated in the display. NEDERLANDS ITALIANO Seek tuning Up Down Down in short intervals ("AF" must be switched off) Up in short intervals ("AF" must be switched off) FRANÇAIS ENGLISH DEUTSCH Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the FMT button for two seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands. To start Preset Scan: · Press SC/MIX for approximately two seconds. All of the stored stations of the adjusted waveband will be scanned one after the other. The memory bank and preset position of the currently scanned station will flash in the display. To select a scanned station and switch off Preset Scan: · Press SC/MIX briefly. To select a scanned station and switch off the Radio-Scan function: · Press SC/MIX briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan. Changing the scan time The scan time can be changed from between five to a maximum of 30 seconds. Please refer to chapter "DSC programming - SCANTIME". Scanning stations with Radio-Scan You can also scan all stations which can be received. To start the Scan function: · Press SC/MIX briefly. The scanned frequency or the station name will start flashing in the display. During the actual scanning process "SCAN" will be displayed. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. [. . . ] The card supplied with the radio is used to display the model name, type number (7 6. . ) and the serial number. With the extra card it is possible to display the Short Additional Memory (S. A. M. ) data entered by your specialised dealer. See chapter "Short Additional Memory S. A. M. ". If you remove the KeyCard during the reading process, "READ KC" will show on the display panel. [. . . ]