User manual BLAUPUNKT TORONTO BT400

[. . . ] · Read these instructions carefully and completely before using the car sound system. · Keep the instructions at a location so that they are always accessible to all users. · Always pass on the car sound system to third parties together with these instructions. In addition, observe the instructions of the devices used in conjunction with this car sound system. General safety notes Observe the following notes to protect yourself against injuries: · Do not modify or open the device. [. . . ] Notes: · The Bluetooth® streaming mode can be selected only if a suitable streaming device is connected. · If the connection to the streaming device is lost during playback, the display briefly shows "CON LOST" (connection lost) and the car sound system changes to the previous audio source. Selecting tracks u Briefly press the button 5/ change to the previous/next track. > to 42 Bluetooth® Additional functions in the Bluetooth® menu Changing the Bluetooth® PIN The factory-set Bluetooth® PIN of the car sound system is "1234"; e. g. it must be entered on the cell phone when registering a cell phone. u In the Bluetooth® menu, select the "PIN EDIT" menu item. button > to open the sub- u If necessary, press the button @ / 2 repeatedly until the desired device is displayed. You have the following options: ENGLISH button B to connect the u Press the device displayed. The display shows "CONNECTNG". As soon as the device is connected, "CONNECTED" is briefly displayed and you are returned to the Bluetooth® menu. If the device is already connected, "CON EXIST" (connection exists) is briefly displayed and you are returned to the list of registered cell phones or streaming devices. If necessary, remove connected devices first while the car sound system is switched off. Starting C'n'C mode u Press the SRC button 6 repeatedly until the name of the device connected via C'n'C appears on the display. Notes: · The C'n'C mode can be selected only if a suitable device is connected via a C'n'Cready interface. · To operate the radio in C`n`C mode, please read the chapter "CD/MP3/WMA/C`n`C/CD changer mode". · When using suitable adapter cables, you can connect up to 3 C'n'C-ready Blaupunkt interfaces to the car sound system. For the car sound system to distinguish the different interfaces, you can assign an individual device number to every interface (see ch. "User settings", section "Performing settings in the user menu", "C`N`C" menu item). Starting AUX mode u Press the SRC button 6 repeatedly until "CDC / AUX" appears on the display. Note: You can enter a separate name for the rear AUX input that is shown on the display in AUX mode if you selected the connected audio source (see ch. "User settings", section "Performing settings in the user menu", "AUX EDIT" menu item). Rear AUX input Different external audio sources can be connected to the car sound system via the rear AUX input (Rear-AUX-IN): · C`n`C-ready devices from the Blaupunkt accessories programme (e. g. a C`n`C-ready Bluetooth®/USB or iPod®/USB interface; C`n`C = Command and Control). [. . . ] Ha az itt leírt információk nem felelnek meg az Ön egyedi beszerelési igényeinek, akkor vegye fel a kapcsolatot Blaupunkt márkakereskedjével, a járm gyártójával vagy hívja telefonos ügyfélszolgálatunkat. · - - . - - , . · Ersít vagy CD-váltó beszerelésekor elbb a készülék test csatlakozásait kell csatlakoztatni, majd csak ezután a bemeneti és kimeneti csatlakozódugókat. A küls eszközök test csatlakozásait nem lehet az autós hangsugárzó rendszer testhez (házhoz) csatlakoztatni. · , , , Blaupunkt . (). 387 GR ­ , µ : · µ µ! [. . . ]