User manual BLAUPUNKT TP DX-V MULTIMEDIA D

[. . . ] 6 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Notes and accessories . . . . . . . . . . . . 6 Scanning tracks (SCAN) . . . . . . . . . . . . . . . [. . . ] You can switch the unit on even if the ignition is off: Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive, press the button 9. The flip-release panel opens. Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD. To do so, press button 3. Note: To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel Gently close the control panel whilst exerting a little pressure until you feel it click into place. CD playback begins. Remove the control panel. Attach the control panel again. The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 3 To switch the unit on, press button 3. To switch the unit off, press button 3 for longer than two seconds. The unit switches off. 8 ADJUSTING THE VOLUME The volume can be adjusted in steps from 0 (off) to 66 (maximum). ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Adjusting the volume Instantaneous volume reduction (mute) This feature allows you to instantaneously reduce (mute) the volume to a level preset by you. To increase the volume, turn the volume control 2 to the right. To decrease the volume, turn the volume control 2 to the left. Briefly press button 3. "MUTE" appears in the display. Setting the mute level You can set the unit's mute volume level. Setting the power-on volume You can set the unit's default power-on volume. Press the MENU button 8. Keep pressing the or button : until "ON VOLUME" appears in the display. Press the MENU button 8. There are three preset memory levels for the FM range and one for the AM range. Six stations can be stored on each memory level. Selecting the FM memory level Set the required sensitivity using the and buttons :. When you have finished making your changes, Press the FM button 4 to switch between the FM memory levels (FM1, FM2 and FMT). Selecting the AM frequency range press the MENU button 8 or OK ;. Tuning into stations manually You can also tune into stations manually. Press the AM button 5 to select the AM frequency range. Press the or button :. Storing stations Storing stations manually Tuning into a station There are various ways of tuning into a station. Automatic seek tuning Select the required memory level (FM1, FM2 or FMT) or the AM frequency range. Press the or button :. The unit tunes into the next receivable station. Tune into the station. Press one of the station buttons 16 > for longer than one second to store the station to that button. 11 RADIO MODE Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM memory depending on the selected frequency range. Note: Stations that were previously stored in this memory are deleted in the process. [. . . ] "BASS" appears in the display. Adjusting the bass settings Press the AUDIO button =. "BASS" appears in the display. Keep pressing the button : until "BALANCE" appears in the display. Press the or button : to adjust the bass. When you have finished making your changes, or button : to adjust the balance (right/left). When you have finished making your changes, Press the press the AUDIO button =. Adjusting the treble settings Press the AUDIO button =. "BASS" appears in the display. press the AUDIO button =. [. . . ]