User manual BLAUPUNKT TP E EXACT MP3 W/W G

[. . . ] 39 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Telephone mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Recalling stored stations . . . . . . . . . . . . . . . . . . . . . . [. . . ] · Press the FMT button for two seconds. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station. If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands. To start Preset Scan: · Press SC for approximately two seconds. All of the stored stations of the adjusted waveband will be scanned one after the other. The memory bank and preset position of the currently scanned station will flash in the display. To select a scanned station and switch off Preset Scan: · Press SC briefly. To select a scanned station and switch off the Radio-Scan function: · Press SC briefly. If no station is selected, the scan function will be automatically switched off after the frequency band has been run through completely. The unit will tune in the station listened to before starting the scan. Changing the scan time The scan time can be changed from between five to a maximum of 30 seconds. Selecting a programme type a) Using the preset buttons When PTY is switched on, you can use the preset buttons 1-6 to select the programme types stored at the factory. · Press one of the presets 1 - 6. The selected programme type will be displayed for two seconds. If you wish to listen to a station with this PTY, · press / ration. to start seek tuning ope- PTY is an RDS service offered by more and more radio broadcasters. This feature allows you to select FM stations according to their programme type. After you have chosen the PTY of your preference, the corresponding stations can be selected either by seek tuning or using the scan function. Switching PTY on/off · Press PTY. When the function is active, the programme type selected last will briefly appear in the display. "PTY" will be permanently indicated in the lower right corner of the display panel. 45 PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS PTY ­ Programme Type ITALIANO FRANÇAIS ENGLISH DEUTSCH If the system is unable to find a station offering the selected programme type, the display will show "NO PTY" and a beep tone will be released. The station received before starting seek tuning will be tuned in. [. . . ] The volume can be adjusted from between 0 to 9. Use this setting to alter the viewing angle to your liking from -1 to 0 to +1. You can adjust the display brightness from between 1 to 16. You can also select different values for day and night. [. . . ]