User manual BLAUPUNKT TP E EXACT W/W GB

[. . . ] 6 International telephone information . . . 6 ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Notes and accessories . . . . . . . . . . . . 6 Scanning tracks (SCAN) . . . . . . . . . . . . . . . 14 Repeating tracks (REPEAT) . . . . . . . . . . . [. . . ] The unit switches off after the control panel is removed. Any CD already inserted in the unit remains there. Attaching the control panel Slide the control panel from left to right into the unit's panel locking mechanism. Press the left-hand edge of the control panel into the unit until it clicks into place. Removing the control panel 1 Note: When attaching the control panel, make sure you do not press the display. If the unit was still switched on when you removed the control panel, the unit will automatically switch on with the last settings activated (i. e. radio, CD, CD changer, or AUX) when the panel is replaced. 7 SWITCHING ON/OFF Switching on/off There are various ways of switching the unit on/off: Switching on/off using the vehicle ignition If the unit is correctly connected to the vehicle's ignition and it was not switched off using button 3, it will switch on/off simultaneously with the ignition. You can switch the unit on even if the ignition is off: Switching on by inserting a CD If the unit is switched off and there is no CD inserted in the drive, press the button 9. The flip-release panel opens. Gently insert the CD with the printed side uppermost into the drive until you feel some resistance. The CD will be drawn automatically into the drive. You must not hinder or assist the drive as it draws in the CD. To do so, press button 3. Note: To protect the vehicle battery, the unit will switch off automatically after one hour if the ignition is off. Switching on/off using the removable control panel Gently close the control panel whilst exerting a little pressure until you feel it click into place. CD playback begins. Remove the control panel. The unit switches off. Attach the control panel again. The unit switches on. The last settings (radio, CD, CD changer or AUX) will be reactivated. Switching on/off using button 3 To switch the unit on, press button 3. To switch the unit off, press button 3 for longer than two seconds. Six stations can be stored on each memory level. Selecting the FM memory level : until "SENS HI" or "SENS LO" appears in the display. "SENS HI" means that the tuner is highly sensitive. "SENS LO" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, "lo" lights up in the display. When you have finished making your changes, Press the MENU button 8. Keep pressing the or button Set the required sensitivity using Press the FM button 4 to switch between the FM memory levels (FM1, FM2 and FMT). Selecting the AM frequency range press the MENU button 8 or OK ;. Tuning into stations manually You can also tune into stations manually. Press the AM button 5 to select the AM frequency range. Press the or button :. Storing stations Storing stations manually Tuning into a station There are various ways of tuning into a station. Automatic seek tuning Select the required memory level (FM1, FM2 or FMT) or the AM frequency range. Press the or button :. The unit tunes into the next receivable station. Tune into the station. Press one of the station buttons 1- 6 > for longer than one second to store the station to that button. 11 RADIO MODE Storing stations automatically (Travelstore) You can automatically store the six stations with the strongest reception in the region. [. . . ] The hours start flashing. Press the MENU button 8 or OK ; twice. 17 PORTUGUÊS or button : until "CLOCKSET" appears in the display. ESPAÑOL To set the time, press the MENU button 8. FRANÇAIS CLOCK - TIME Selecting 12/24-hour clock mode Press the MENU button 8. "MENU" appears in the display. Briefly displaying the time when the unit is switched off To briefly display the time when the unit is off, Keep pressing the Press the or button : until "24 H MODE" or "12 H MODE" appears in the display. press the / DIS button 7. The time is displayed for eight seconds. or button : to switch between the modes. When you have finished making your changes, press the MENU button 8 or OK ;. Displaying the time continuously when the unit is off and the ignition is on To display the time when the unit is off and the vehicle ignition is on, press the MENU button 8. Keep pressing the or button Press the : until "CLK DISP OFF" or "CLK DISP ON" appears in the display. or button : to switch between the ON/OFF settings. When you have finished making your changes, press the MENU button 8 or OK ;. 18 SOUND AND VOLUME DISTRIBUTION SETTINGS ENGLISH PORTUGUÊS ESPAÑOL FRANÇAIS Sound and volume distribution settings You can adjust the sound and volume distribution settings separately for each source (radio, CD, CD changer and AUX). Setting the left/right volume distribution (balance) To set the left/right volume distribution (balance), press the AUDIO button =. [. . . ]