User manual BLAUPUNKT TP E FREESTYLER R/B

[. . . ] Display (display field) button - indicates the time on the display DIS, change display contents 8 MENU button - selects the menu for basic settings button - opens the flip/release panel Arrow-key block OK button - confirms menu entries and starts the scan function X-BASS button to adjust and switch X-BASS on/off AUDIO button (Audio) - adjusts bass and treble, balance and fader Key block 1 - 6 TRAF button, switches traffic information standby on/off CD·C button - selects between Cassette, CD changer (if connected) and AUX sources 27 TABLE OF CONTENTS Notes and accessories . . . . . . . . . . . . . 29 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The telephone conversation or speech output are reproduced via the car radio speakers. This requires the mobile telephone or navigation system to be connected to the car radio as described n the installation instruction . Y Blaupunkt dealer can tell you whi our h navigation systems can be used wi h your car radi . If a trafic announcement is receiv f d during a telephone call, or while t e navigation system is speaking, the tra- Note: To protect your hearing, the poweron volume is limited to a value of "38". If the volume level was higher when the unit was switched off, the volume will be reset to "38" when the unit is switched on again. When you have finished making your changes, ; twice. press the MENU button 8 or OK 32 VOLUME ADJUSTMENT ffic announcement is not reproduced until the call or the speech output has finished. If a call is received or if the navigation system begins speaking during a traffic announcement, the announcement is reproduced. The telephone call or speech output can be heard when the traffic announcement has finished. The volume at which navigation output or telephone calls start is adjusted as follows: Press the MENU button 8. Press the or button : until "TEL/NAVI VOL" appears in the display. Set the desired volume with the buttons :. Press the or button : repeatedly until "SCANTIME" appears on the display. buttons : to set the desired scanning time. pleted, press the MENU button 8 or OK ; twice. Note: The set scanning time also applies to scanning in the CD and CD changer mode. Hold down the BND / TS button 5 for more than two seconds. The automatic station-storing procedure begins. "TRAVEL-STORE" appears on the display. Once the process is completed, the station stored in FMT memory location 1 is played. Use the Once the setting has been com- Listening to preset stations Select the memory or frequency range. Hold down the preset station button 1 - 6 > of the desired station. Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. This information can be received and displayed by your car radio. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS You can use the PTY function to select stations of a particular programme type. Scanning receivable stations (SCAN) You can briefly listen in to all receivable stations. The scanning time can be set in the menu at between 5 and 30 seconds. Starting SCAN Hold down the OK button ; for more than two seconds. [. . . ] The hours now flash. button : to switch between ON and OFF. Press the MENU button 8 or OK ; once you have completed the setting. Set the hours using the tons :. or but- Press the MENU button 8 or OK ; twice, once you have completed the setting. Briefly viewing the time when the car radio is switched off In order to view the time when the car radio is switched off, Selecting the 12/24-hour clock mode Press the MENU button 8. "MENU" appears on the display. press the button / DIS 7. The time appears on the display for eight seconds. Press the or button : repeatedly until "24 H MODE" or "12 H MODE" appears on the display. 45 TONE AND VOLUME BALANCE Tone and volume balance You can adjust the tone and volume balance separately for every audio source (radio, Cassette, CD changer, AUX and traffic announcements). Note: Adjustments to tone and volume balance for traffic announcements can only be made during a traffic announcement. Setting the volume distribution left/right (balance) To set the volume distribution left/ right (balance), press the AUDIO = button. "BASS" appears on the display. Press the button : repeatedly until "BALANCE" appears on the display. or button : to set the volume distribution left/right. Adjusting the bass Press the AUDIO = button. "BASS" appears on the display. Press the Press the AUDIO = button once you have completed the setting. Press the the bass. or button : to set Press the AUDIO = button once you have completed the setting. Setting the volume distribution front/rear (fader) To set the volume distribution front/ rear (fader), press the AUDIO = button. [. . . ]