User manual BLAUPUNKT TRAVELPILOT DX-N

[. . . ] Navigation TravelPilot DX-N Operating instructions Safety Information The TravelPilot DX-N has been designed for use in cars. Such special information as height restrictions or maximum permissible loads as required for commercial or semitrucks or busses have not been included on the navigation CDs. 2 Using the system while driving If you do not pay attention to the current traffic situation at all times, you could easily cause serious traffic accidents. To avoid being distracted by the TravelPilot DX-N, please observe the following information: · · · · Before you use the system for the first time, make yourself familiar with the TravelPilot DX-N and its operation. Find a suitable place to stop when you would like to re-program the TravelPilot DX-N. [. . . ] In addition, you can also conveniently select an overview map to show the entire route. In each of the different map modes, it is also possible to display other additional information, such as driving time, driving distance, Gas stations, parking and tourist attractions. For more information on route guidance with map display, refer to the "Quick Reference", "Example of route guidance with map display". If route guidance last used the arrow symbols mode, you can easily switch to the map mode. A selection menu will appear on the bottom left edge of the display. Route guidance will continue in map mode. 2. 25 Allgemeines Kurzanlei- Zieleingabe Touren Zielspeicher Einstellun- Anhang Route guidance Overview 1 2 3 4 5 6 The driving direction arrow indicates your current vehicle position and driving direction. Left-hand information window with remaining driving time/time of arrival, driving route and status of the traffic congestion function. Right-hand information window with arrow symbol and distance bar graph. A coloured line marks the route on the map. Name of the road you are currently travelling on Name of the road onto which the next turn will be made 26 6 4 2 5 1 3 Selecting the information map (Destination area, Overview) You can activate an information map for the destination area or an overview map for the entire route. The "Settings" menu will appear. A selection list for the type of information to be displayed will appear. Route guidance will continue using the information map selected. 2. 3. Route guidance Selecting the current position map (North, Automatic, Intersection zoom) There are three different display modes for the current position map: ­ ­ ­ Map due north ("North"), Map in driving direction ("Automatic") and Map in driving direction or due north (depending on the scale), map scale is adjusted accordingly (Intersection zoom"). Plus Point: If you select "Intersection zoom", the map scale will change automatically to show more detail just before a turn is to be made. The "Settings" menu will appear. Press A selection list for the type of information to be displayed will appear. Route guidance will continue with the map selected. 2. 3. Adjusting the map scale The map scale can be selected freely for every map. Scales ranging from 0. 1 mi to 200 mi are available. This means that one centimetre on the display can represent from 0. 1 mi to 200 mi. The "Change scale" menu will open. [. . . ] in the 2. System settings Calibration settings 1. Mark on the top line of the "Settings" menu. Press The sub-menu for calibration will appear. OK . Calibration after changing the tires When the car tyres are changed, from summer to winter tires for example, it might be necessary to calibrate the TravelPilot DX-N again. Press A warning note will appear. OK . If you want to calibrate the system, select "Continue" and press OK . [. . . ]