User manual BLAUPUNKT TRAVELPILOT DX-R4

[. . . ] TravelPilot Navigation Radio/CD TravelPilot DX-R4 / RNS4 Operating instructions http://www. blaupunkt. com INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX 2 Device overview 1 2 3 4 5 6 7 8 9 17 16 15 14 13 12 11 10 1 2 3 4 5 6 button, opens the control panel. The way the rocker switch functions depends on the individual menus and operating modes. TA button, activates traffic information standby. If pressed briefly during navigation: the active destination is displayed and the last voice output is repeated, entries that are marked with ". . . " in a list will be displayed in their entirety. [. . . ] If navigation is not active, the navi menu will be displayed again. If navigation is active, you will be switched to the navigation session. Note: If you change the route options whilst a navigation session is active, the route will be recalculated. The set route options remain active until they are changed again. Setting a position marker You can save your current vehicle position at any time, even during an active navigation session. This feature is useful if you notice an interesting location during your journey and want to return to it at some other point in time. To set a position marker for your current position, 1 2 3 press the MEN button :. Press the right knob/pushbutton ;. NAVI. MENU ROUTE OPTION ROUTE LIST POSITION MARK TA ON SYMBOLS 2D Saving a position marker After you press the right knob/pushbutton ;, a selection menu opens. You are now given the option of assigning a name to the position marker or returning to the menu in which you set the position marker. If you select the NAME option and enter a name for the position marker, the name will be automatically stored in the destination memory. A speller will open for you to enter the short name. Enter a short name, keep the right knob/pushbutton ; pressed for longer than two seconds or select the symbol and press the right knob/pushbutton ;. The position marker is saved in the destination memory with the short name that you entered. The position marker is then saved together with the time in the POSITION MARK memory in the destination memory. Note: A maximum of five position markers (together with the time) can be saved in the POSITION MARK memory. INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX 51 DEUTSCH DEUTSCH If you selected CONTINUE, the menu from which you set the position marker will be opened without a short name being saved for the position marker. DEUTSCH NEW NAME HOME_ TIME: 03:27 ABCDEFGHIJKLMNO PQRSTUVWXYZ -/. ÄÖÜ 1234567890 E ENGLISH INTRODUCTION NAVIGATION RADIO MODE CD MODE CD CHANGER SETUP INDEX 52 Traffic announcements during navigation You can switch traffic announcement standby during navigation on/off. The TA function is activated or deactivated. Activating / deactivating voice output You have the option of navigation with or without voice output. The voice output informs you of the distance to the decision points and provides you with audio driving recommendations. Press the right knob/pushbutton ; until the required ON or OFF option is highlighted. Press the ESC button 9 to close the navi menu. Activating / deactivating the last 10 destinations memory If the LAST 10 option is activated, the last 10 navigation destinations are stored automatically in memory. You can also deactivate the LAST 10 memory. The navigation session's navi menu appears. Keep pressing the right knob/pushbutton ; until the required ON or OFF setting is highlighted. [. . . ] 32 Storing stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Street . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 T TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 TIM - Traffic Information Memory . . . . . . . . . . [. . . ]