User manual BLAUPUNKT TRAVEL PILOT 200 EAST

[. . . ] If pressed briefly during navigation: the active destination is displayed and the last voice output is repeated. Entries that are marked with ". . . " in a list will be displayed in their entirety. The way the rocker switch functions depends on the individual menus or operating modes. OK button, enter key. 9 : ; < = > ? [. . . ] To define the route options, 1 2 3 4 press the MENU button :. The navigation session's navi menu appears. TIP: You can also open the route options menu using the macro button. The selection menu for the route options opens. Select the menu item you want to change and press the OK button 8. NAVI. MENU MODIFY ROUTE TRAFFIC AHEAD ROUTE OPTION ROUTE LIST POSITION MARK ROUTE OPTION ROUTE FAST MOTORWAY WITH FERRY WITH TOLL WITH CONTINUE ROUTE OPTION ROUTE DYN. - CONTINUE If you want to close the selection menu, 1 2 select the CONTINUE menu item and press the OK button 8. If navigation is not active, the navi menu will be displayed again. If navigation is active, you will be switched to the navigation session. Note: If you change the route options whilst a navigation session is active, the route will be recalculated. The set route options remain active until they are changed again. Setting a position marker You can save your current vehicle position at any time, even during an active navigation session. This feature is useful if you notice an interesting location during your journey and want to return to it at some other point in time. The navigation session's navi menu appears. Keep pressing the OK button 8 until the required ON or OFF setting is highlighted. Press the ESC button < to close the navi menu. NAVI. MENU LANGUAGE ON LAST10 AAN TIME INFO MAN. POSITION NAVI SIMULAT. Selecting time information To choose between displaying the approximate remaining journey time, the approximate time of arrival or the current time, 1 2 press the MENU button :. The navigation session's navi menu appears. The selected option is displayed symbolically after TIME INFO. The clock symbol represents the current time display, the clock with the finishing line flag stands for the approximate time of arrival, and the clock with the car symbol represents the approximate remaining journey time. TIP: You can also toggle the time info using the macro button. For further information, read "Programming the macro button" in the "Setup" chapter. 4 Press the ESC button < to close the navi menu. To change the time display, 3 Manually setting your position If GPS reception is not available, you can manually set your position yourself. [. . . ] 29 Special destinations position surrounding area . . . . . . . . . . . . . . . 30 Starting a navigation session to a tour destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Starting navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Storing stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]