User manual BLAUPUNKT TRAVEL PILOT 300 EUROPE

[. . . ] 30 Road safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 International telephone information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For more information, refer to the section on "Traffic information reception". The car audio system will be muted to the mute level selected. Risk of serious injury!If the switch-on volume is set at the maximum, the volume can be very high when you switch on your car radio. If the volume was set on maximum before the unit was last switched off and the switch-on volume is set at "0", the volume can be very high when you switch on your car radio. This may damage your hearing! When you have completed setting the volume, press either the MENU button 8 or OK ;. 33 VOLUME ADJUSTMENT Setting the volume for the confirmation tone If you hold down a button for longer than two seconds when using certain functions, e. g. storing a station on a station button, a confirmation tone (beep) sounds. The volume of this beep is adjustable. Press the MENU button 8. Press the or button : repeatedly until "BEEP" appears on the display. Adjust the volume using the and buttons :. "0" means the beep is off, "9" means maximum beep volume. When you have completed the setting, press either the MENU button 8 or OK ;. 34 RADIO MODE This unit is equipped with an RDS radio receiver. Many of the receivable FM stations transmit a signal that not only carries the programme but also additional information such as the station name and programme type (PTY). The station name appears on the display as soon as it is received. DEUTSCH PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Radio mode Switching REG function on/off To use the RDS functions AF and REG, press the MENU button 8. Note: q If no station with the selected programme type is located, a beep sounds and "NO PTY" appears briefly on the display. The unit tunes into the station last received once again. q If the set station or another station in the broadcasting network transmits the selected programme type at a later time, the car radio automatically switches from the current station - or from CD or CD changer mode - to the station featuring the desired programme type. Switching PTY on/off Selecting programme type and starting a search Press the or button :. The current programme type appears on the display. If you would like to select a different programme type, you can change to another programme time within the time the programme is displayed by pressing the or button :. Or Press one of the buttons 1 - 6 > to select the programme type stored on that particular button. The selected programme type will appear briefly on the display. The next station corresponding to your selected programme type will be tuned into. Press the Press the MENU button 8. Press the or button : repeatedly until "PTY ON" or "PTY OFF" appears on the display. or button : to switch PTY on (ON) or off (OFF). When PTY is activated, PTY lights up on the display. Storing the programme type on the station buttons Use the Press the or button : to select a programme type. Hold down the desired station button 1 - 6 > for more than two seconds. The programme type is now stored on the selected station button 1 - 6 >. Press the MENU button 8 or OK ;. 38 RADIO MODE High-frequency cut-off feature (HICUT) The HiCut function improves the sound during poor radio reception (only FM). [. . . ] or button : to set the desired volume increase. Notes on adjusting the equalizer We recommend you use a CD you are familiar with when adjusting the equalizer. Before adjusting the equalizer, set the tone and volume balance to zero and deactivate the loudness function. To do this, please see the chapter "Tone and volume balance". Press the Press the MENU button 8 or OK ; once you have completed the setting. Listen to the CD you have chosen. Evaluate the tone impression according to your taste. Now consult the chart "Sound impression" section of "An aid to adjusting the equalizer". Set the equalizer values as described under "What to do". 47 EQUALIZER Switching the equalizer on/off In order to switch on the equalizer, Setting the level indicator The level indicator (spectrometer) on your display briefly indicates the volume, tone and equalizer settings with symbols on your display as you make the corresponding settings. [. . . ]