User manual BLAUPUNKT TRAVEL PILOT DX-N NAV. P

[. . . ] · Do not modify or open the device. Otherwise, it could be damaged and then ignite or explode. Or acidic, flammable liquid could run out of the battery. · Do not expose the device to very low (below -20 °C) and very high temperatures (above 60 °C), e. g. [. . . ] The coordinates to the selected location are displayed. 26 Working with the map | Voice output during route guidance u / u u ­ Touch the symbol to change between 2D and 3D view. / Touch the symbol to change the map orientation between driving direction and direction North. Touch the symbol to change these settings for the speed limit: u u u u u Touch the symbol to show (check mark) or hide speed warnings (no check mark) on the map. Touch the symbol to switch the ­ warning beep on (check mark) or off (no check mark). Touch the symbol to adjust a tol­ erance value for the speed warning. A warning occurs only if the tolerance value is exceeded. Touch the symbol to show (check mark) or hide (no check mark) points of interest. Touch the symbol to switch auto zoom on (check mark) or off (no check mark). Auto zoom means that the map scale is perfectly adjusted to the respective driving situation during route guidance. If you approach an action, the view is enlarged, e. g. so that you can clearly see the next intersection. Note: This information can be displayed only if it is activated in the navigation settings. "Working with the map", "Performing map settings") The so-called "carsor" represents your position. The compass always points north (for orientation) Top field: Name of next street Bottom field: Name of current street The action arrow shows the next action and the distance to that action. When you come closer to the location of the next action, a bar is shown on the right side: The fewer yellow segments are displayed, the closer you are to the location of the next action. 28 Additional functions during the route guidance Additional functions during the route guidance Prerequisite: · Route guidance - or · Route simulation (demo) u Touch any position on the map to display additional functions. The Route Guidance Options add-on menu is displayed. The symbol identifies the blocking. To cancel the blocking: In the add-on menu, touch the symu bol again (the check mark indicates that a blocking has been entered). - or u Touch No in order to not delete the blocking. ! Cancelling route guidance u Touch the symbol in the add-on menu. - or u Touch No to continue the route guidance. The following functions are now available: ­ Entering a blocking ­ Cancelling route guidance ­ Skipping the next destination ­ Display information about the destination ­ Display route list Skipping the next destination Prerequisite: · Tour with at least 1 interim destination (tour planning) u In the add-on menu, touch the symbol to skip the next interim destination. The route is recalculated and the next destination is approached. Entering a blocking During the route guidance, you can block the route segment lying ahead of you. An alternate route is calculated and the blocked partial route is bypassed. The Traffic Jam Ahead menu is displayed. [. . . ] due to high-rises, tunnels, path to the sky. Wait until the mountains or heavy foliage. Heavy snowfall and (thunder) The route guidance is then continued automatically. Transport of the vehicle by carsleeper train or ferry. The device has no or only a very The internal TMC antenna only Connect an external TMC antenpoor TMC reception. [. . . ]