User manual BLAUPUNKT TRAVEL PILOT*DX-N*RECHNER

[. . . ] · Do not modify or open the device. Otherwise, it could be damaged and then ignite or explode. Or acidic, flammable liquid could run out of the battery. · Do not expose the device to very low (below -20 °C) and very high temperatures (above 60 °C), e. g. [. . . ] A prerequisite in this case is sufficient GPS reception. Reaching the place of destination As soon as you have reached the destination point, the message "You have reached your destination" appears. The map now displays only your current position. Disturbed GPS reception On the map, the symbol indicates that no sufficient GPS signal is being received. If you start a route guidance at this point, the navigation device calculates the route based on the last known position. If the GPS reception is disturbed during route guidance for an extended period of time, the route guidance is stopped. As soon as the reception is re-established, the device automatically recognises whether your position has changed and, if necessary, recalculates the route. At that time, you can simply continue your destination guidance. Note: External influences can interfere with the view to the sky and, therefore, the GPS reception of the navigation device. For further details, read the chapter "Troubleshooting table". Quitting the route guidance u Touch any position on the map. The Route Guidance Options add-on menu is displayed. u Touch the symbol to quit the route guidance. - or u Touch No to continue the route guidance. 24 Working with the map Working with the map Showing a Map u Touch the symbol in the main menu. u To change to the map display from the Navigation menu: Touch the button. Touch the symbol to switch the ­ warning beep on (check mark) or off (no check mark). Touch the symbol to adjust a tol­ erance value for the speed warning. A warning occurs only if the tolerance value is exceeded. Touch the symbol to show (check mark) or hide (no check mark) points of interest. Touch the symbol to switch auto zoom on (check mark) or off (no check mark). Auto zoom means that the map scale is perfectly adjusted to the respective driving situation during route guidance. If you approach an action, the view is enlarged, e. g. so that you can clearly see the next intersection. If the next action is farther away, the view is reduced so that you can easily see the run of the road. The display shows the second page of the menu. Touch the symbol to show (check mark) or hide altitude and speed (no check mark) on the map. [. . . ] The memory card is ejected from the slot. Note: Observe the marking on the card slot of the device. 10 Special topic ­ POI lists Special topic ­ POI lists You can also copy POI lists independent of TPAssist to a memory card, rename them and create POI icons, so that they can be used with the device. POI lists are available from external sources, e. g. via the Internet from POICON (www. poicon. com). [. . . ]