User manual BLAUPUNKT TRAVEL PILOT DX-R70T F

[. . . ] 14 Storing stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Automatic storage of strongest stations with Travelstore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Calling stored stations . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Changing scan time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Example: Storing program type The factory has stored one program type on each of the keys 1 - 6. You may, however, store other available program types. If you would like to store a different program type, "PTY" must be illuminated in the display. l If you wish you may turn "PTY" on by pressing the PTY key. l b) with the station search toggle switch << >>I When PTY is turned on, you can choose a program type by pressing. << >>. The program type last selected will be displayed for 3 seconds. Select the program type by pressing << >> and then press the selected key (l-6) until you hear a beep. The selected program type can be called with this key when "PTY" is illuminated in the display. - Current station: NDR 3; - "PTY" lit up in the display; - POP chosen; 16 CD operation - Station search started, no station with PTY-POP found. - Display shows "NO PTY" and automatically switches back to NDR 3. - NDR 2 is broadcasting PTY-POP; the unit switches within the station chain to NDR 2 for the duration of the program. Even during CD operation, the unit automatically switches within the station chain to the radio station broadcasting the selected program type. At the end of the PTY program, the unit will switch back to the previous source (radio or CD). Note: Please note that, as already mentioned, not all RDS stations are supporting those functions yet. By pressing station key 3 again, the pause function is deactivated and the CD program will be continued where it stopped. CD SCAN operation To briefly scan the CD titles. To activate SCAN: Press the SC key for 2 seconds; the l display will show "CD-SCAN". The titles will be briefly scanned sequentially. To deactivate SCAN: Press the SC key for 2 seconds. l The title last played will be continued. Inserting CDs Load the magazine with one or several CDs (with the label facing up). The CDs are counted from the bottom up. . Removing CDs Open the door of the CD changer and press the eject button. 18 Playing CDs Select the CD changer with the SRC key. Press the SRC key repeatedly until~ the l display shows "CHANGER". The first CD recognized by the changer will be played. The display will indicate `T' (Track) and next to it the respective number of the song just selected. CD Repeat (RPT/repeat function) CD titles can be played repeatedly. You are able to: Repeat the presently playing title (REPEATT) or all titles of the CD you are currently playing (REPEAT-D). When the RPT function is activated, the display lights up with "RPT". After choosing the repeat function and after each title change, the display will briefly show "REPEAT-T" or "REPEAT-D". [. . . ] Make sure the receiver is firmly anchored (preferably at both front and back) and does not vibrate. Installing the Receiver in Most Dashboards This car receiver and its mounting bracket are designed for installation in vehicles with a standard DIN installation compartment measuring 182 x 53 mm, a 165 mm installation depth and an instrument panel thickness of approximately 1 to 20 mm in. Place the mounting bracket in the compartment and bend over all of the tabs possible. Your vehicle may also allow you to provide extra stability at the back of the receiver. Look at the wall behind the radio cavity to see if there is a small hole the size of the enclosed plastic plug, If so, screw it onto the treaded bold at the back of the receiver before pushing it into the mounting bracket. [. . . ]