User manual BLAUPUNKT TRAVEL PILOT E1 W GB

[. . . ] 35 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Telephone mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Scrolling through the broadcasting networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As soon as a programme has been identified, the station name including a regional identifier, if applicable, will appear in the display, for example, NDR1 NDS (regional programme in Lower Saxony, Germany). When RDS is activated, the preset buttons become programme buttons. You now know exactly which programme you have tuned into, making it easy to find the desired station quickly. But RDS offers you further advantages: switching on the radio or recalling one of the stored frequencies, the unit is automatically searching for an alternative frequency. "SEARCH" will disappear from the display when the alternative frequency has been found or after the frequency band has been run through completely. If the reception quality of the selected programme becomes too bad: · Tune into another station. REG - regional programme Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you are listening to one regional programme and move to an area where another linked regional programme becomes stronger, the unit will switch to that programme. If you wish to continue listening to the first programme, · press the AF button for approximately 1 sec. "REG ON" appears in the display. AF - Alternative frequency The AF (Alternative Frequency) function makes sure that the strongest frequency of the currently selected programme is always tuned in automatically. This function is activated when "AF" appears in the display. · Press the corresponding preset button briefly to recall the station. Automatically storing the strongest stations with Travelstore You can automatically store the six most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. · Press the FMT or BND button for 1 sec. "T-STORE" will appear in the display. The six strongest FM stations will be automatically stored on the memory bank "T" (Travelstore). When this process has been completed, the radio will play the first station stored on preset 1. If desired, stations can also be stored manually on the Travelstore bank (see "Storing stations"). Storing stations On FM, you can store six stations on the preset buttons 1-6 for each of the memory banks I, II and T. On MW/LW, you can also store six stations each. (only with Como RCM 148, Texas RCM 148, Madison DJ) · Select the desired memory bank. · Tune in a station with the rocker switch (either automatically / or manually << >>). Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned on all wavebands. Preset Scan cannot be started unless PTY has been switched off ("PTY" is not lit up in the display). [. . . ] BLS OFF ­ The function is deactivated. ITALIANO DSC (Direct Software Control) allows you to customise certain programmable, basic settings to suit your personal needs and preferences and then store them. The basic settings for this audio equipment were made at the factory. In the following you can find an overview of these settings, so that you can always reset to these if desired. If you wish to alter any of the programming, · press SRC to choose the desired operating mode (e. g. [. . . ]