User manual BLAUPUNKT TRAVEL PILOT EASY IBERIA

[. . . ] When leaving the recommended route, the system will automatically calculate a new one leading to the desired destination. This can either be done immediately or after the system has prompted you twice , , Make a U-turn, if possible". The route guidance function only provides information for the individual vehicle. The system does not include possible limitations for trucks or coaches (e. g. [. . . ] If your vehicle is moved outside of the digitised network (for example, when travelling abroad), then the display shows the message "OFF MAP". In these cases you should follow the arrow on the display, which points in the direction of the destination. When reentering from a non-digitised road into the digitised network, the TravelPilot will need a distance of some 46 100 metres travel to be able to output driving recommendations again. If you have reached your destination, the system displays the corresponding message and you will hear a voice saying "You have reached your destination". After the symbol "destination reached" has disappeared from the display, the system will only show you the name of the currently used street or display "NAV MENU" if the vehicle is stationary. The map orientation depends on the scale selected. It is rotated to follow the direction of driving for all scale values up to 20 km; for all other scales as of 20 km, the map is orientated towards the destination. The following information is shown on the map: - the calculated route (blinking) - the current vehicle location and, depending on the selected scale, also the destination - the currently used road (bottom) - the real distance to the destination (top left corner) - the selected scale (top right corner) - a menu bar on the left showing the distance to the destination travel time driving recommendation compass GPS status direction to the destination These menu items can be switched on and off in the DSC menu under MAP INFO. the name of the road to turn into (top). This indication will be displayed once again by repeating the voice output. - a coloured road map 50 The individual road classes are displayed with the following colours: red = Motorways yellow = Federal roads (scale < 100 km) green = Country roads (scale < 10 km) dark green = Major residential roads (scale < 2 km) light brown = Residential roads (scale < 0. 2 km) light brown/dotted = Factory premises, paths (only scale 0. 1 km) green/dotted = Pedestrian areas (scale < 0. 2 km) 51 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS Info menu INFO MENU LOCATION MAP The map showing the current vehicle location is rotated towards the direction of driving. Back to the NAV menu: Press ENT key once again while the destination info is still being displayed. With active route guidance use / keys to switch to the route guidance symbols. 54 DSC menu (Direct Software Control) The DSC menu contains the following items: NAV MENU DESTINATION MEMORY DELETE CURR. ENTER LOCATION MAP INFO AUDIO GPS STATUS STANDBY TIME CALIBRATE NAV MENU Back to the NAV menu. DESTINATION MEMORY Use this item to edit the destination memory. The following editing options are available: SORT ABC . Sorts the destinations in alphabetical order. SORT DISTANCE Sorts the destinations as a function of the distance to the respective vehicle position. The order adopted in the destination memory will be changed each time the vehicle is moved to a new position. NO SORT Resets the sorting to the order of entry. 55 DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS STORE DESTINATION Stores the destination entered last. You can enter a short name in order to find the destination more quickly. If you do not want to record such a name, press the ENT key. [. . . ] The system provides you with an acoustic and visual message saying "the route (to destination) is being calculated". To determine the most favourable route, the system gives priority to motor and expressways. After a few seconds you will hear the information "The route is calculated" or the first driving recommendation. When the voice output function is switched on, you will hear all important route guidance information via a separate loudspeaker. Day/night mode You can switch the monitor from full colour representation to a dimmed red picture. [. . . ]