User manual BLAUPUNKT TRAVEL PILOT LUCCA D/EU

[. . . ] FM·AM button Short press: Activates radio mode and selects the FM, MW and LW wavebands. Long press: Starts the Travelstore function. CD·C button Activates CD mode, MP3 mode or CD-changer mode. Display button Radio/CD: Search downwards / Skip to the previous track. [. . . ] If the system is already receiving a TMC station, the TMC symbol will appear on the display. If you want to make a currently active navigation session dynamic, 1 press and hold down the NAV button 1 for longer than 2 seconds during the active navigation session. Mark and confirm the ROUTE OPTIions menu item. Mark and confirm the DYNAMIC route option. Note: If you select dynamic navigation you can additionally choose between a quick, short or optimum route calculation. 4 Press and hold down the OK button ; for longer than 2 seconds and then press the ESC button =, or press the ESC button = twice. NAVI TMC TRAFF. JAM ROUTE OPTI NAV A selection menu appears in the display. 2 3 The menu for setting the route options appears. If the route option is activated, a filled-in square appears next to it. ROU=E OP=ION TMC DYNAMIC FAST SHORT OPTIMUM o o NAV FM1 10 16 pm TMC NDR 2 16mi NAV The system calculates the route again and the navigation display appears. Furthermore, the TMC symbol is displayed surrounded by a border. Notes: If necessary, you will be asked to insert the navigation CDROM if it is not already present in the CD drive. Press the ESC button = to return to the list. Note: To ensure that only the data that are relevant to your current vehicle position are used, the TMC function only processes TMC messages relating to an area within a radius of approx. 60 miles (100 km) around your vehicle position. =MC aU=O TMC ON OFF NAV =MC TMC 1/2 NAV A7 Hannove r Hamburg accident b etween MJ =MC TMC 1/2 NAV r Hamburg accident b etween MJ Schwarmst SETUP INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER APPENDIX 45 INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX 46 Bypassing a traffic jam during navigation Alongside the ability to automatically bypass traffic jams with the aid of the dynamic navigation feature, the TravelPilot E also gives you the option of manually entering traffic jams or blocked sections of road during an active navigation session. To bypass a traffic jam, proceed as follows: 1 2 3 4 5 Press and hold down the NAV button 1 for longer than 2 seconds. Mark and confirm the TRAFFic JAM menu item. Turn the menu knob : to set the distance to the end of the traffic jam relative to your current position. Note: If necessary, the system will ask you to insert the navigation CD-ROM. Cancelling the traffic jam bypass feature 1 2 3 4 Press and hold down the NAV button 1 for longer than 2 seconds. A selection menu appears in the display. Mark and confirm the TRAFFic JAM menu item. If you want to cancel the traffic jam bypass feature, press the OK button ;. [. . . ] Loudspeaker connection (4 x 4 /35 W) . . . . . . . . . . . . . . . . . . . . . . . . . . . TravelPilot installation . . . . . . . . . . . . . . . Gyro adjustment . . . . . . . . . . . . . . . . . . . . . . . . 8 4. 3 Removing the TravelPilot Detach the control panel. [. . . ]