User manual BLAUPUNKT TRAVEL PILOT LUCCA UK/IRELAND

[. . . ] Keep the instructions at a location so that they are always accessible to all users. Always pass on the device to third parties together with these instructions. Use as directed The device is designed for use in automobiles. Special information about the navigation of campers, busses and trucks, such as altitude limitations or maximum permissible road load, is not included on the navigation CD. [. . . ] · If the box shows no check mark, the name of the MP3 file is always displayed. Displaying scrolling text During the MP3 playback, text is displayed on the MP3 display. If this text is too long for the display, it can be displayed as scrolling text. The previously scanned and played track is played. Changing MP3 settings The settings you perform in the Options menu of the MP3 player include: · Whether ID3 tags are displayed, · whether the display shows scrolling text. Bob Marley MIX 15:09 MP3 Browse Options You can toggle as follows between scrolling text and fi xed text display: 44 RPT Jamin 00:04 Operating the CD/MP3 player In the Options menu of the MP3 player, select the "Scroll" menu item. Use the OK button = to toggle the text display: · The check mark means: Text is displayed as scrolling text. · If the box shows no check mark, the text is not displayed as scrolling text. To completely display abbreviated texts, see the next section. Displaying MP3 information To completely display texts shown abbreviated on the display: In the Options menu of the MP3 player, select the "MP3 info" menu item. Options MP3 info Start scan ID3 Scroll Operating the navigation system The operating principle Entering a destination You no longer need a street map to find a specific destination. Instead, you enter your destination in the navigation system using the text input (see p. Positioning The current vehicle position is determined by means of GPS satellite signals, the speedometer signal and a gyroscope. The navigation system compares these data with the digital map material on the navigation CD and calculates the vehicle position as well as the route to the destination. For the navigation system to determine the current position, the vehicle must be on a street which is featured on the navigation CD ("digitised street") and the GPS antenna must receive sufficient satellite signals. Use only the original navigation CDs for the ROME NAV56E with the "E" imprint!To load the navigation software: Insert the original navigation CD · is disconnected from the operating voltage. Note: Similar to a printed street map, the map material is no longer up to date after some time. This may result in incorrect turn-by-turn directions. For this reason, replace your navigation CD as soon as a new version is available (see www. blaupunkt. com). The navigation display To display the navigation display: Press the NAVI button >. Note: The navigation software must be loaded for the navigation display to be displayed. AB C D EA FM1 4 with the "E" imprint in the drive (see p. The display shows "NAVI SW" and a progress indicator. "Language is being loaded" appears next. The navigation software is automatically installed. Do not interrupt the installation of the navigation software!As soon as the installation is complete, the displays shows "Observe the road traffic regulations". [. . . ] An equaliser consists of several filters which allow for improving the sound or adjusting it to personal preferences. EON ­ Enhanced Other Network In case of a traffic announcement (TA), the device switches over from a non-traffic information station to a traffic information station of the same station chain. After the traffic announcement, the system switches back to the previously heard programme. GPS ­ Global Positioning System This system allows for a worldwide positioning by means of 24 satellites orbiting the earth at elevations of 20000 km and transmitting a precise time signal. [. . . ]