User manual BLAUPUNKT TRAVEL PILOT RNS150T

[. . . ] DIS, to change the display contents MENU button, to open the main settings menu. 9 : ; < = > ? @ button, to open the flip-release control panel Arrow buttons OK button, to confirm menu entries and start the scan function, For starting and stopping recording onto MMC/SD DEQ button, to activate/deactivate and adjust the equalizer AUDIO button (audio), to adjust the bass, treble, balance and fader Keys 1 - 5 and TRAF, for switching traffic information standby on/off RDS·SF button. Short press: to switch the RDS function on/off (Radio Data System). SRC button, to switch the source between CD, CD changer (if connected), AUX (if activated), MMC/SD and MicrodriveTM Player (if connected). 47 CONTENTS Notes and accessories . . . . . . . . . . 50 Road and traffic safety . . . . . . . . . . . . . . . . . . . [. . . ] Briefly press the BND·TS button 5 to switch between the memory banks and frequency ranges. 61 RADIO MODE Setting the sensitivity of station seek tuning You can choose whether to only tune into stations with a strong reception or to also tune into those with a weak reception. Storing stations automatically (Travelstore) You can automatically store the five stations with the strongest reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations that were previously stored in this memory bank are deleted in the process. Keep the BND·TS button 5 pressed for longer than two seconds. "TRAVEL STORE" appears in the display. After the process is completed, the station that is stored in location 1 in the FMT memory bank will be played. Press the MENU button 8. Keep pressing the or button : until "SENS" appears in the display. Press the button :. The display shows the currently set sensitivity level. "SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. If "SENS LO" is selected, lo lights up in the display. Set the required sensitivity using the and buttons :. Listening to stored stations Select the memory bank or frequency range (waveband). When you have finished making your changes, press the MENU button 8 or OK ;. Press the station button 1 - 5 > of the station you want to listen to. Storing stations Storing stations manually Scanning receivable stations (SCAN) You can briefly play (scan) all the receivable stations. You can set the scanning time (scantime) to between 5 and 30 seconds in the menu. The programme type is now stored on the station button 1 - 5 > that you selected. Press the MENU button 8. Press the button : repeatedly until "SHARX" appears on the display. 64 RADIO MODE Use the or button : to switch SHARX on or off. "SHARX OFF" denotes no automatic waveband change, "SHARX ON" that the SHARX feature is activated. ;. TRAFFIC INFORMATION Your unit is equipped with an RDS-EON receiver. Every time a traffic announcement (TA) is transmitted, you will automatically be switched from a station that does not provide traffic information to a station within the broadcasting network that does. Once the traffic announcement has been heard, you will be switched back to the programme that you were listening to before. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Traffic information Press the MENU button 8 or OK Displaying scrolling text Some radio stations use the RDS signal to transmit advertising or other information instead of their station name. These scrolling texts appear in the display. You can deactivate the scrolling text display. Keep the RDS button ?pressed until "NAME FIX" appears in the display. Switching traffic information priority on/off Press the TRAF button >. Traffic announcement priority is active when a traffic jam symbol lights up in the display. Note: You will hear a warning sound: if you leave the reception area of a traffic information station that you are currently listening to. if, while listening to a CD, you leave the reception area of a traffic information station that you are tuned into and the subsequent automatic search cannot find a new traffic information station. [. . . ] The following filters are available: SUB LOW EQ 32 - 50 Hz LOW EQ 63 - 250 Hz MID EQ 315 - 1, 250 Hz MID HIGH EQ 1, 600 - 6, 300 Hz HIGH EQ 8, 000 - 12, 500 Hz These filters can be set without the need for measuring equipment. They will allow you to significantly influence the sound characteristics in your vehicle. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Equalizer Press the MENU button 8. "MENU" appears in the display. Press the button : repeatedly until "LOUDNESS" appears in the display. or button : to adjust the boost level. The selected boost level appears in the display alongside "LOUD". "LOUD 6" is the maximum boost level; "LOUD 0" means that loudness is deactivated. Press the Notes on adjusting the settings We recommend you use a CD that you are familiar with for making changes to the settings. [. . . ]