User manual BLAUPUNKT TRAVELPILOT RNS 3

[. . . ] Radio/Navigation TravelPilot RNS 3 Operating instructions 170 1 2 3 4 5 6 7 8 9 17 16 15 14 13 12 11 10 Equipment illustration 1 2 3 4 5 6 7 Open key, opens the operating panel. The functions performed by the rocker switch depend on the menus or operating modes which are currently active. DEL key, deletes entries in the edit menu. If you press this button briefly during navigation: the current or next road is displayed fully and the last voice output is repeated. [. . . ] Each time you turn the right-hand rotary/pushbutton, the contents of the list will move up by one line. The selection bar will remain on the second-last entry and cannot be moved to the last entry until you have reached the end of the list. Scrolling through lists page-by-page To find the entry you are looking for in long lists more quickly, you can also scroll through the list page-by-page. Use the right-hand rotary/pushbutton ; to move the selection bar to the arrow symbol or . Press the right-hand rotary/pushbutton ;. The next or previous page of the list will appear in the display. The selection bar will remain positioned on the arrow symbol. Press the right-hand rotary/pushbutton ; repeatedly until you reach the page you are looking for. List (Route list for navigation) with more than ten entries 204 Navigation Destination entry - Town If you want to drive to a destination in another town, you must first enter the town. Select TOWN The editing menu for entering the town name will appear. Use the right-hand rotary/pushbutton ; to move the cursor to the character you want to select. When the desired character is marked, press the right-hand rotary/pushbutton ;. The character will appear in the editing field. The first place name on the list of towns and cities which begins with the letter selected will appear in the editing list. When the name of the town you want to select appears in the editing list, Mark the symbol and press the right-hand rotary/pushbutton ;, or Press down the right-hand rotary/pushbutton ; for longer than two seconds. The display will switch to the list of the place names. The name you want to select will be marked. Press the right-hand rotary/pushbutton ; to select this place as your destination. If the name of the town or city is listed more than once, a submenu will appear. You can select the town/city you want from this list. Destination entry menu 205 SVENSKA DANSK ENGLISH Navigation Once you have selected the place, you will be prompted to continue with DESTINATION ENTRY. Now select from among - 206 STREET, entry of the destination street. Whether or not you can enter a street as your destination depends on the size of the city/town selected and the data stored on your navigation CD. TOWN CENTRE, selection of the centre of a city or city district as your destination DEST. [. . . ] After the system test has ended, the Set-up menu Install will appear automatically. Set-up menu Install Displaying the GPS status and your position If you want to display the number of GPS satellites the system can current receive and your GPS position, Select the menu item GPS STATUS in the Set-up menu Install or Activate the menu item GPS STATUS in the main navigation menu. 251 SVENSKA DANSK ENGLISH Set-up/Basic settings Activating/deactivating the system coding Activating/deactivating the coding In the Set-up menu Security you can activate the coding for your TravelPilot. If the coding is active, it will not be possible to start the system after it has been disconnected from the vehicle battery unless the correct code number is entered (refer to "Switching on coded systems after they have been disconnected from the vehicle battery"). Note: Because the TravelPilot has not been equipped with any other theft-protection system, we strongly recommend that you activate the coding. To activate/deactivate the coding, Mark the menu item CODE in the Set-up menu Security and Press the right-hand rotary/pushbutton ;. [. . . ]