User manual BLAUPUNKT VANCOUVER CD35

[. . . ] Radio / CD Bristol CD35 Vancouver CD35 7 645 075 310 7 645 070 310 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 7 13 12 11 10 9 8 2 CONTROLS DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH 1 2 3 4 5 6 7 8 9 : ; Button to switch the device on/ off and operate the volume mute function. button for detaching the control panel (release panel). Volume control CD compartment AUDIO button to adjust the bass, treble, balance and fader. MENU button Short press: Open the settings menu. [. . . ] Automatic station seek tuning DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH Tuning into a station Setting the sensitivity of station seek tuning You can choose whether the radio should only tune into stations providing good reception or whether it can also tune into those with a weak reception. Press the or button 8. The radio tunes into the next receivable station. Tuning into stations manually You can also tune into stations manually. Note: You can only tune into stations manually if the RDS function is deactivated. Press the MENU button 7. Press the or button 8 repeatedly until "SENS" and the currently set value appear in the display. "SENS HI6" means that the tuner is set to the highest sensitivity setting. "SENS LO1" means it is set to the lowest sensitivity setting. Set the desired sensitivity using the buttons 8. When you have finished adjusting the setting, Press the or button 8. Browsing through broadcasting networks (only FM) If radio stations provide several programmes, you have the option of browsing through their "broadcasting networks". Note: The RDS function must be activated before you can use this feature. press the MENU button 7. Note: You can set different sensitivity levels for FM and MW or LW (AM). Storing stations Storing stations manually Press the or button 8 to switch to the next station on the broadcasting network. Select the memory bank that you want (FM1, FM2, FMT) or one of the wavebands (MW or LW). Tune into the station that you want. Note: When using this feature, you will only be able to switch to stations that you have received once before already. To receive the stations, use the scan function or the Travelstore function. Press and hold down one of the station buttons 1 - 6 ; for longer than two seconds to assign the station to that button. 33 RADIO MODE Storing stations automatically (Travelstore) You can automatically store the six stations providing the best reception in the region (only FM). The stations are stored in the FMT memory bank. Note: Any stations previously stored in this memory bank are deleted in the process. "SCAN" appears briefly in the display followed by a flashing display of the current station name or frequency. Cancelling SCAN and continuing listening to a station Press the MENU button 7. Scanning stops and the radio continues playing the station that it tuned into last. Press and hold down the BND·TS button < for longer than two seconds. "FM TSTORE" appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memory bank. Setting the scanning time Press the MENU button 7. Press the or button 8 repeatedly until "SCAN TIME" appears in the display. Set the desired scanning time using the buttons 8. When you have finished adjusting the setting, Listening to stored stations Select the memory bank or waveband. press the MENU button 7 twice. Note: The scanning time that you set is also used when scanning in CD mode and in CD-changer mode. Press the station button 1 - 6 ; that corresponds to the station that you want to listen to. Scanning receivable stations (SCAN) You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds). Starting SCAN Programme type (PTY) Besides transmitting the station name, some FM stations also provide information on the type of programme they are broadcasting. Your car radio can receive and display this information. For example, the programme types can be: CULTURE TRAVEL JAZZ SPORT NEWS POP ROCK CLASSICS Press and hold down the MENU button 7 for longer than two seconds. [. . . ] When you are not changing any settings, the level display depicts the peak music/speech output. You can switch the level display on/off. Press the MENU button 7. "MENU" appears in the display. Press the X-BASS button 9. Press the or button 8 repeatedly until the setting that you want appears in the display. When you have finished adjusting the setting, Press the or button 8 repeatedly until "PEAK LVL" appears in the display. press the X-BASS button 9. or button 8 to switch between "PEAK ON" and "PEAK OFF". [. . . ]