Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BLAUPUNKT VD SIX. We hope that this BLAUPUNKT VD SIX user guide will be useful to you.
Lastmanuals help download the user guide BLAUPUNKT VD SIX.
Detailed instructions for use are in the User's Guide.
[. . . ] Do not connect loudspeakers to earth only use the correct terminals as indicated. The cross section of the positive and negative cables must be at least 16 mm2. The positive cable between the battery and the amplifier must be protected directly at the battery using a fuse holder (160 amperes). [. . . ] Scratch the surface down to the bare metal at the point at which the earth contact is made and apply graphite grease. 5 The switching line must be connected when connection is carried out +12V using the RCA jacks or the loudspeaker jacks of the car radio. LEVEL control You can use the LEVEL control to adjust the input sensitivity of the Velocity power amplifier to the output voltage of your car radio's preamp output. When connecting a car radio produced by another manufacturer, you must adjust the input sensitivity in accordance with the information provided by the manufacturer. Please use high-quality Velocity RCA cables for this connection. INPUT MODE input selector switch In the CH1+2 and CH3+4 switch position, each channel (CH1-CH6) of the amplifier can be operated separately. the mono/stereo switches must be set to the ST (stereo) position. In the CH1+2/CH3+4 or CH3+4/CH5+6 switch position, the amplifier channels are connected together at the input side. Some examples of the most popular applications are provided in Fig. LP / HP / FULL switch Before installing, adjust the crossover switch on the power amplifier to set the low pass filter (LP), high pass filter (HP) or full range (FULL). If you select the FULL position, the full frequency response will be used at the output. Using the integrated crossovers is particularly useful in the case of multi-channel sound systems with a separate subwoofer. In order to obtain the best sound when a subwoofer is connected, the subwoofer must be separated as far as the frequencies it receives are concerned, i. It must only be fed with low frequencies (bass). To ensure that this is the case, select LP and use the crossover frequency control to adjust the upper frequency to between 40 Hz and 160 Hz. This ensures that every subwoofer is optimally separated as far as the frequencies it receives are concerned. [. . . ] It is very important that you take into account the specifications of the loudspeakers being used whilst you are adjusting the crossover. BASS BOOST You can adjust the bass output of the Velocity amplifier using the bass boost control. It can be activated in order to protect the subwoofer against mechanical overload by low frequencies that are outside our hearing range. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BLAUPUNKT VD SIX
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BLAUPUNKT VD SIX will begin.
