User manual BLAUPUNKT WOODSTOCK DAB54

[. . . ] Radio / DAB / CD / MMC / MP3 Woodstock DAB54 Operating instructions 7 644 708 310 PocketDAB 2004 http://www. blaupunkt. com Bitte aufklappen Open here Ouvrir s. v. p. Öppna här Por favor, abrir Favor abrir Åbn her 2 1 17 2 16 3 18 4 15 19 5 14 13 12 11 10 9 6 7 8 3 SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH DANSK PORTUGUÊS ESPAÑOL CONTROLS 1 Button to switch the device on/ off and operate the volume mute feature button to open the flip-release control panel BND button (band) to select radio mode as the source, to select the FM memory banks and the MW and LW wavebands TS to start the FM Travelstore function DAB button to select DAB mode as the source and to select the DAB memory bank. TS to start the DAB Travelstore function Volume control Keys 1 - 3 Arrow buttons DIS·ESC button to change the display content and close menus without saving changes. MENU button to open the basic settings menu. [. . . ] Programming your favourite tracks on an MP3-CD Using the TPM function (Track Program Memory), you can program and play up to 192 favourite tracks for a maximum of 3 CDs or MMCs. You can program the tracks in any order you like, however, the tracks will always be played in ascending order. If you have activated the favourite track (TPM) feature, only the previously programmed tracks on the current MP3-CD/ MMC will be played. Programming favourite tracks To program your favourite tracks for a CD, proceed as follows: briefly and repeatedly press the 5 RPT button < until "REPEAT OFF" appears in the display. Selecting MP3 info If you want to select the "MP3 INFO" display mode, you first have to activate this function in the menu. In order for the system to be able to display MP3 information, the information must be stored on the CD in the form of ID tags together with the MP3 files. Press the MENU button 9. Press the or button 7 repeatedly until "VARIOUS MENU" appears in the display. Select your first favourite track. Press and hold down the 2 TPM button 6 for longer than two seconds. "TRACK STORED" appears in the display. The track has now been added to the list of favourite tracks for this CD. Press the OK button :. Press the or button 7 repeatedly until "MP3 INFO" appears in the display. 104 MP3 MODE Continue in the same way for all your remaining favourite tracks on the CD. Switching TPM on/off To switch the TPM function on/off, MMC/SD MODE You can play files stored on an MMC/ SD (Multi-Media Card / Secure Digital) using the Woodstock DAB54. You can write data onto the MMCs/SDs that you want to use with the Woodstock DAB54 with the help of a standard MMC/SD card reader and your PC. Note: Please note that when you prepare the MMC/SD, you must observe the directory structure rules as described in the "MP3 mode" chapter. In order to optimise the device's access to the data on the MMCs/SDs, you should store no more than 20 directories and a maximum of 200 files on an MMC/SD. press the 2 TPM button 6 repeatedly until "TPM ON" or "TPM OFF" appears in the display. If no tracks are programmed, an appropriate notification will be displayed. Deleting individual tracks from a list You can delete individual tracks from a list of favourite tracks. Listen to the track that you want to delete from the list. Deleting all the lists for all CDs You can delete all the stored tracks for all the CDs. button 6 for longer than eight seconds until you have heard all three confirmation beeps. Detach the flip-release panel. Insert the MMC/SD with its labelled side uppermost and its contacts first into the MMC/SD slot until you feel the MMC/SD click into place. Attach the flip-release panel again. 105 DANSK PORTUGUÊS ESPAÑOL Press and hold down the 3 CLR Inserting an MMC/SD SVENSKA button 6 for longer than two and less than four seconds until you hear a confirmation beep. Inserting/removing MMCs/SDs The MMC/SD slot is located on the left below the CD compartment. To insert/ remove an MMC, you must first detach the flip-release panel. To do so, please read the "Detachable control panel" chapter. NEDERLANDS Press the or button 7. Press and hold down the 3 CLR ITALIANO FRANÇAIS ENGLISH DEUTSCH MMC/SD mode MMC/SD MODE Removing an MMC/SD Detach the flip-release panel. [. . . ] The application shows the BWS icon to be active according to FIG 0/13 in case of the MOT Header mode as well but the service is not decoded. This is a case of wrong signalling from the service provider side. · According to the profile setting in customize -> options -> MOT / BWS profile the data services are decoded and displayed. If a data service has a different profile then selected the BWS icon in the main screen will be displayed but the service will not be accessible. [. . . ]