User manual BLAUPUNKT XL 217.1

[. . . ] 7 Switching on/off . . . . . . . . . . . . . . . . . . . . . . 9 Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Setting the tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Switching to radio mode . . . . . . . . . . . . . . . . [. . . ] The next station corresponding to your selected programme type will then be tuned into. Press the Storing a programme type on a station button Select a programme type using the or button :. Press the MENU button 8. Keep pressing the or button : until "PTY ON" or "PTY OFF" appears in the display. Keep the required station button 1 - 6 > pressed for longer than two seconds. The programme type is now stored on the selected button 1 - 6 >. Press the or button : to switch PTY ON or OFF. When PTY is switched on, PTY lights up in the display. ;. Optimising radio reception Treble reduction feature during interference (HICUT) The HICUT function improves reception during poor radio reception (only FM). If interference occurs, the treble is automatically reduced thus reducing the interference level. Switching HICUT on/off Press the MENU button 8 or OK Selecting a programme type and starting seek tuning Press the or button :. The current programme type appears in the display. Press the MENU button 8. 13 PORTUGUÊS ESPAÑOL FRANÇAIS Programme type (PTY) RADIO MODE Keep pressing the Press the or button : until "HICUT" appears in the display. button : to ad- Displaying scrolling text Some radio stations use the RDS signal to transmit advertising or other information instead of their station name. These scrolling texts appear in the display. You can deactivate the "scrolling text" display for stations that you have stored on the station buttons. just HICUT. "HICUT 0" means that no reduction will be made, "HICUT 3" means a maximum automatic reduction of the treble and interference level will be applied. Press the MENU button 8 or OK ;. Stopping MIX Repeating a track (REPEAT) If you would like to repeat a track, press button 4 RPT >. "REPEAT TRCK" appears briefly on the display, the RPT symbol lights up. The track is then repeated until RPT is deactivated. Stopping REPEAT Press the button 5 MIX > once again. "MIX OFF" appears briefly on the display, the MIX symbol goes out. If you would like to end repeat, press the button 4 RPT > once again. "REPEAT OFF" appears briefly on the display, the RPT symbol goes out. Normal playback is resumed. Scanning tracks (SCAN) You can briefly listen in to all the tracks on a CD. Hold down the OK button ; for more than two seconds. Read about setting the scanning time in the section "Setting the scanning time" in the chapter "Radio mode". Stopping SCAN and continuing playback Interrupting play (PAUSE) Press the button 1 >. "PAUSE" appears on the display. Ending Pause Press the button 1 pause. Play then resumes. > during the Press the OK button ; to end scanning. [. . . ] Observe las normas de seguridad dadas por el fabricante del vehículo. - Al perforar agujeros, asegúrese de no dañar ninguna pieza del vehículo. - La sección transversal del cable positivo y del cable negativo no debe ser menor de 1, 5 mm2. - ¡No conecte a la radio los conectores ubicados en el vehículo! [. . . ]