User manual BLUETREK DUO STEREO

[. . . ] · To maximize battery lifetime, it is recommended to recharge your headset to full capacity only when the battery is low, since a battery has a lifetime of about 500 charging cycles. · If you leave your headset battery empty for an extended period of time, it could excessively discharge the battery. In this case, charge your headset for 2 hours or more until the battery recovers and recharges completely. When you first charge the headset after prolonged storage, it may take few minutes for the red indicator light to turn on. [. . . ] English Muting the microphone To mute the microphone during an active call Press and hold the VOL+ or VOL- button for approcimately 2 seconds. Your headset will announce "mute microphone". A periodic tone can be heard in the speaker then the microphone is muted. To end the mute function When the microphone is muted, press and hold the VOL+ or VOL- button for approcimately 2 seconds. The periodic tone will end and the mute function will be disabled. Transferring a call from BLUETREK® DUO Stereo to the mobile phone With a phone in Headset Profile During an active call, to transfer it to the phone, simply turn off your headset. With a phone in Hands-Free Profile During an active call, to transfer it to the phone, double click on the TALK button. This function may not be available, depending on your phone. 7 I BLUETREK DUO Stereo Transferring a call from the mobile phone to the BLUETREK® DUO Stereo English BLUETREK DUO Stereo I 8 With a phone in Headset Profile Switch on your headset. With a phone in Hands-Free Profile During an active call on the mobile phone, press once on the TALK button. This function may not be available depending on your phone. Call waiting When you hear a call waiting alert while you are on a call, press approx. 3 seconds on the TALK button to accept the second call and place the current call on hold. To switch between an active call and a hold call, press approx. To end the active call and take the hold call, press once on the TALK button. This function may not be available, depending on your phone. However, you can always answer the second call from your phone keypad. Voice Alert A built-in voice alert is an advanced feature that is now available on your headset. A recorded voice reminds you of the actions in your headset, such as: redial the last number, reject a call, cancel a call, transfer a call, mute the microphone, cancel the mute, if your headset is in the pairing mode, if the pairing is successful, if the pairing is failed, when your headset needs to be charged, if your headset is connected/disconnected from the handset, if the stereo is connected/disconnected, the language selection of the voice alert, and the language that you have selected. You may choose to change the language of the voice alert or even activate /inactivate this function. Press and hold the TALK button for 10 seconds until the indicator light flashes twice in blue rapidly. Press the VOL+ button to select the language as below sequence: English => Espanol => Français => inactive the function => English 4. Press the TALK button to choose the language that you prefer Your headset will automatically switch off after the language is changed. [. . . ] - Stream music (please refer to your mobile phone user manual for details). The music will then play with standard effect from your headset. - When the music is playing from your BLUETREK Duo Stereo® Bluetooth® headset, press the VOL+ (for next effect) on your headset for approx. 2 seconds to change the musical effect as below sequence. [. . . ]